Engine Components

10 Titanium Retainer Set of 16 for 26095 Beehive Spring

Upgrading to these 10& deg

10 Tool Steel Retainer Set of 16 All Valves w/ 26955, 26956 and 26957 Springs

COMP Cams Lightweight Tool Steel Retainers for #26955, #26956, #26957 springs provide the best of all valve train benefits: light weight, as well as exceptional strength and wear characteristics.

11 Degree Steel Retainers for 1.225"-1.25" Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

1 PTFE Valve Seal for .500" Guide Size, 5/16" Valve Stem

< ul>< li> Fits: 5/16" Valve Stems - .500" Guides (.600" Seal Diameter)</li>< li> Valves Seals keep unwanted oil from entering the combustion chamber through clearance in the valve guides</li>< li> Smaller diameter than COMP Umbrella Seals to allow use with double springs</li></ul>

7 Degree Steel Retainer Set 100 for 3/8" Valves w/ 1.500"-1.550" Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

7 Degree Steel Retainer Set of 100 for 3/8" Valve w/ 1.437"-1.500" Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

7 Degree Steel Retainer Set of 12 for for 11/32 Valve w/ 26925 Spring

7& deg

7 Degree Steel Retainer Set of 8 11/32" Valve w/ 26915/26918 Beehive Springs

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

7 Degree Titanium Retainer Set of 12 for 26925 Spring w/ 8mm Valve Stem

Upgrading to these 7& deg

7 Degree Tool Steel Retainer Set of 12 for 8mm Valve w/ 26926 Springs

These new Tool Steel Retainers from COMP Cams have a 7& deg

7 Degree Tool Steel Retainer Set of 16 for 8mm Valve w/ 26926 Springs

These new Tool Steel Retainers from COMP Cams have a 7& deg

7 Steel Retainer for 11/32" Valve w/ 1.437"-1.500" Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

7 Steel Retainer for 11/32" Valve w/ 1.437"-1.500" Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

7 Steel Retainer for 3/8" Valve w/ 1.437"-1.500" Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

7 Steel Retainer Set of 16 for 11/32" Valve w/ 1.437"-1.500" Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

7 Steel Retainer Set of 16 for 3/8" Valves w/ 1.500"-1.550" Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

7 Titanium Retainer for 26925 Spring w/ 8mm Valve Stem

Upgrading to these 7& deg

7 Titanium Retainer Set of 16 for 26925 Spring w/ 8mm Valve Stem

Upgrading to these 7& deg

7 Tool Steel Retainer for 11/32" Valve w/ 26926 Springs in Non-LS Engine

These new Tool Steel Retainers from COMP Cams have a 7& deg

7 Tool Steel Retainer Set of 16, 11/32" Valve w/ 26926 Springs in Non-LS Engine

These new Tool Steel Retainers from COMP Cams have a 7& deg

7 Tool Steel Retainer Set of 16, 8mm Valve, Spring w/ 1.290" O.D

These new Tool Steel Retainers from COMP Cams have a 7& deg

Boost Timing Master for use with MSD Ignition Control

• Easily connects to your MSD Ignition.
• Adjust the timing from the driver’s seat.
• New feature allows you to set a boost pressure point to start the retard!

CAM BOLT, TOP FUEL 3/8" X 1.38

Cam Bolt, Top Fuel 3/8" X 1.380

Distributor Bracket

Upper Seal for Hi-Techâ„¢ Belt Drive Systems (#6500, #6502, #6504 and #6506)

Dual Taper 7.600" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.