Engine Components

Hi-Tech 210 Radius 7.900" Long, .080" Wall, 3/8" Diameter Pushrod Set

Designed for high lift Applications where Pushrod and seat interference are problems at maximum lift, Hi-Tech 210& deg

1 Metal Viton Valve Seal for .500" Guide Size, 3/8 Valve Stem

3/8 x .500" Metal Body Viton Valve Seal

Replacement Timing Chain for 3110, 3104, 3125, 3122 and 3130 Hi-Tech Timing Sets

Ideal for all street performance and race applications.

10 AN Plug

• Black Anodized

Straight 7.500" Long, .165" Wall, 7/16" Diameter Pushrod Set

Hi-Tech Straight 7.500" Long, .165" Wall, 7/16" Diameter Pushrod - Set of 16

1.125" Tall Polylock Set for High Energy Rockers w/ 7/16" Stud

High Energyâ„¢ Aluminum Polylocks with 7/16" Stud diameter.

1 O-Ring Valve Seal for Stock Guide Size, 11/32" Valve Stem

< ul>< li> Fits: 11/32" Valve Stems - OE-Size Valve Guides (.400" Outer Diameter)</li>< li> Valves Seals keep unwanted oil from entering the combustion chamber through clearance in the valve guides</li>< li> Use standard o-ring Seal retainer and oil splash shield</li>< li> Requires no machining.

Dual Taper 9.850" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Engine Timing Belt

High Energy 212/212 Hydraulic Flat Cam K-Kit for International Harvester 304-392

K-KIT - Complete Kit Includes: Camshaft, Lifters, Valve Springs, Retainers, Valve Locks, Valve Stem Seals, Timing Chain Set, Assembly Lube (in flat tappet applications), Decals and Instructions.

Hi-Tech 7.000" Long, .080" Wall, 5/16" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

HRT Turbo

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines.

Replacement Timing Chain for 2100 and 2136 Timing Sets

Replacement Timing Chain for 2100 and 2136 Magnum Timing Sets

Straight 9.700" Long, .165" Wall, 7/16" Diameter Pushrod

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

Magnum 7.900" Long, .080" Wall, 3/8" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

10 Superlock Steel Retainer for 1.437"-1.500" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

Dual Taper 8.850" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.250" Long, .165" Wall, 7/16" Diameter Pushrod

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Hi-Tech 10.250" Long, .080" Wall, 3/8" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 210 Radius 8.600" Long, .080" Wall, 5/16" Diameter Pushrod

Designed for high lift Applications where Pushrod and seat interference are problems at maximum lift, Hi-Tech 210& deg

Hi-Tech One-Piece 9.250" Long, .135" Wall, 3/8" Diameter Pushrod Set of 8

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg

Hi-Tech Polylock Set for 1/2" Stud Ultra Pro Magnum Rockers

Hi-Tech Polylocks/Adjusting Nuts, 1/2" Stud for Ultra Pro Magnum/Ultra Pro Magnum XD Rockers - Set of 16

Machined Steel Set of 100 - 7 Degree, 5mm, Single Groove Race Locks

Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running, but this isn't the case.

Replacement Timing Chain for 2120, 2131, 2138 and 2135 Timing Sets

Replacement Timing Chain for 2120, 2131, 2135 and 2138 Magnum Timing Sets

HRT Blower

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines.