Engine Components

High Energy 7.794" Long, 5/16" Diameter Pushrod Set

High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

Set of 16 Single Springs w/ 1.254" O.D., 1.254" I.D., 1.700" Installed Height

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

Hardened Steel Set of 16 - 7 Degree, 11/32", Single Groove Street Locks

Includes 16 Pairs of hardened Steel Street Locks: 1 Groove, 7& deg

Vacuum Cap Assortment 1/8", 3/16", 1/4", 5/16" and 3/8" ( Set of 20)

Edelbrock part #4804 Vacuum Cap Assortment Set of 20 provide a way to seal vacuum line connections on your intake manifold, carburetor or wherever you need.

10 Superlock Steel Retainer Set of 16 for 1.437"-1.500" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

Vacuum Cap Assortment

Use to block off open engine vacuum fittings.

10 AN Plug

• Available for Any Plumbing Situation And Many Custom Applications.

4 AN Plug

• Black Anodized
• Available for Any Plumbing Situation And Many Custom Applications
• 2 per Package

6 AN Plug

• Blue Anodized Aluminum

12 AN Plug

• Blue Anodized Aluminum

Ultra-Seal Exhaust Gasket Material

• Conforms to and seals minor surface irregularities
• Bulk sheet allows you to create your own custom gaskets
• For OE replacement, high performance street, drag race and oval track use

3 AN Plug

• 2 per Package

6 AN Plug

• 2 per Package

7 Titanium Retainer for 11/32" Valve Stem w/ 26915/26918 Beehive Spring

Upgrading to these 7& deg

Replacement Thrust Button for 210 and 212 Timing Covers and 5100 Belt Drive

Riding between the front of the timing Gear and the back of the timing cover.

10 Superlock Steel Retainer Set of 16 for 1.437"-1.500" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

Low Profile Vacuum Fitting for Holley Double-Pumper

Edelbrock part #8096 Vacuum Adapter Fitting is a low profile elbow that is designed to provide clearance for Holley and other carbs with a rear fuel bowl that extends over the vacuum port tap in most intake manifolds.

Performer Series Retainer (Qty 16)

These valve spring retainers are made from 4140L steel and have an 1.375 outer diameter with an 1.070 spring diameter.

Ultra-Seal Exhaust Gasket Material

• Conforms to and seals minor surface irregularities
• Bulk sheet allows you to create your own custom gaskets
• For OE replacement, high performance street, drag race and oval track use

High Energy 8.096" Long, 5/16" Diameter Pushrod Set

High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

Hi-Tech 7.425" Long, .080" Wall, 5/16" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

7 Steel Retainer Set of 16 for 11/32" Valve w/ 1.437"-1.500" Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.