Engine Components

VALVE SPRINGS, 1.415" BEEHIVE

1.065/1.415" OD Beehive Springs

Valve Spring Shim - 1.000" OD, .688" ID .060" Thickness

Valve Spring Shim - 1.250" OD, .814" ID .060" Thickness

These .060" thick Valve Spring Shims with 1.250" outside diameter and .814" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim - 1.500" OD, .645" ID .015" Thickness

These .015" thick Valve Spring Shims with 1.500" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim - 1.500" OD, .645" ID .060" Thickness

These .060" thick Valve Spring Shims with 1.500" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim - 1.640" OD, .635" ID .015" Thickness

These .015" thick Valve Spring Shims with 1.640" outside diameter and .635" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim Kit - 1.250" OD, .814" ID .015" Thickness

These .015" thick Valve Spring Shims with 1.250" outside diameter and .814" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim Kit - 1.250" OD, .814" ID .030" Thickness

These .030" thick Valve Spring Shims with 1.250" outside diameter and .814" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim Kit - 1.250" OD, .814" ID .060" Thickness

These .060" thick Valve Spring Shims with 1.250" outside diameter and .814" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim Kit - 1.437" OD, .645" ID .015" Thickness

These .015" thick Valve Spring Shims with 1.437" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim Kit - 1.437" OD, .645" ID .030" Thickness

These .030" thick Valve Spring Shims with 1.437" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim Kit - 1.500" OD, .645" ID .015" Thickness

These .015" thick Valve Spring Shims with 1.500" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shims 100 - 1.437" OD, .645" ID .060" Thickness

COMP Cams' Valve Spring Shims are manufactured from the highest quality shim stock available.

Valve Spring Shim Set of 8 - 1.300" OD, .520" ID .015" Thickness

Valve Stem Locks 11/32" Diameter (0.50" Low)

Edelbrock part #9615 Valve Stem Locks are 7 Degree, hardened Steel with a 11/32" stem, standard height, machined and hardened replacement valve locks.

X ROLLER LIFTER, CRB CRH W/.140" SEAT

Xtreme Energy 240/246 Hydraulic Flat Cam for 352-428

Hydraulic: Street/Strip, 2800+ stall, headers, 9.5:1 compression, lower Gears, rough idle.

Hi-Tech One-Piece 8.300" Long, .135" Wall, 3/8" Diameter Pushrod Set

Hi-Tech One-Piece 8.300" Long, .135" Wall, 3/8" Diameter Pushrod - Set of 16

Set of 16 Steel Viton Valve Seals for .500" Guide Size, 8mm Valve Stem

COMP Cams offers a complete line of valve stem Seals, from the stock GM "O-Ring" to the positive-stop PTFE Seal.

10 Degree Titanium Retainer Set of 4 for 1.500"-1.550" OD Double Springs

Upgrading to these 10& deg

10 Steel Retainer Set of 16 for 26095 Beehive Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Steel Retainer Set of 16 for 983 Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Superlock Steel Retainer Set of 16 for 1.250" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Titanium Retainer for 1.500"-1.550" OD Double Springs

Upgrading to these 10& deg

10 Titanium Retainer for 1.625" OD 26091 Springs

Upgrading to these 10& deg