Tuning & Engine Management

Battery Management System Master

• Can be daisy chained to multiple satellite units
• Capable of measuring up to 18 cells and 3 temperatures (thermistors)
• Weatherproof connector and housing

Battery Management System Satellite

• Connected to Master BMS as part of system
• Can be integrated into multiple satellite systems
• Weatherproof connector and housing

Bosch LSU 4.2 Wideband UEGO Installation Kit

• No calibration required when used with our gauges.
• Accurate to 0.1 AFR
• Sold as a kit

Bosch Replacement UEGO Sensor

• Never requires free-air calibration when used with an AEM Controller and connector plug.
• Connector and pins included
• Replacement sensor only

CamDisk8 Expansion Software

COMP Cams' part number 180908, CamDisk8 Expansion Software.

CAN Bus Data Logger

• 1KHz Configurable Logging Speed
• Extremely Compact at 2X2X1.5”
• 2 X Fully Configurable CAN Bus inputs

EAS Street Diesel Kit

• 1 EAS Starter Kit
• 1 EAS EGT PRobe
• 2 EAS 0-100psi Pressure Sensors

Eliminator 4-Bank Switch Chip Cable

• Single Or Multi-Program Chip

Exhaust Back Pressure Plumbing Kit

• Premade -4AN Speed-Flex Hose - 24” Long
• Cushion Clamp & Mounting Hardware - to Mount Sensor
• Use w/ Sensor 554-102 (available separately)

Exhaust Back Pressure Sensor Install Kit

• Allows you to mount wideband O2 sensors pre-turbo and get accurate AFR readings
• AEM High Performance Stainless Steel 100psig Sensor
• Includes all necessary hardware for ease of installation

Gateway Bypass Harness

• bypasses factory gateway module
• instals behind dash
• connects to STAR connectors

GPS Speed Sensor

• Simple wiring
• 8000 ppm or 16000 ppm output
• Compact size

MAP Sensor 3-bar for blown/turbo applications

• Applications up to 30lbs of boost.

MAP Sensor - 3 Bar Vacuum to 30PSI

• This sensor monitors manifold vacuum, varying output voltage to the ECU as a function of load placed on the engine…
• Highly accurate design

MAP Sensor Assembly for Atomic TBI

Atomic TBI factory replacement MAP sensor.

Power Grid 4-Connector Hub

This hub allows you to expand the Power Grid system with up to four accessory modules.

Transducer - Vacuum - (30 PSI)

Transducer

VCU 275 - Plug & Pin Kit

• Waterproof connectors
• Quick-connect connectors
• Weatherproof seals to keep contaminants out

1000 PSIg Stainless Sensor Kit

• Includes 1/8" NPT to -4 AN adapter included
• Stainless-steel sensors accurate to within 1% of full scale (pressure sensors)
• Connector and pins included

100 PSIg Stainless Sensor Kit

• Stainless-steel sensors accurate to within 1% of full scale (pressure sensors)
• Connector and pins included
• Analog Data Scaled in Charts

15 PSIa/1 Bar Stainless Sensor Kit

• Stainless-steel sensors accurate to within 1% of full scale (pressure sensors)
• Connector and pins included
• Analog Data Scaled in Charts

1-Bar MAP Sensor #36021 for Chevy LS3 applications

The new Edelbrock 1-Bar Manifold Absolute Pressure (MAP) Sensor #36021 is designed to fit Chevrolet LS3 applications that use an Edelbrock LS3 XT intake manifold or any other factory-style intake that has a 12mm MAP sensor port hole.

2000 PSIg Stainless Sensor Kit

• Accurate to 1% margin of error.
• Includes 1/8" NPT to -4 AN adapter included
• Weather resistant connector and pins included

500 PSIg Stainless Sensor Kit

• Accurate to 1% margin of error.
• Includes 1/8"NPT to -4 AN adapter and barbed fitting.
• Weather resistant connector and pins included

Advantage III Tuning Software

• Tune Like The Pros
• Built In Help Files
• Most Vehicles Supported