Tuning & Engine Management

Power wire

• Power Cable

Livewire / Livewire TS 2-Channel Analog Input Cable

• Enables Monitoring And Recording Of External Sensor Data

GT Universal OBD Block

• OBD Block

SENSOR; OIL PRESSURE; 0-100PSI; 1/8in. NPT MALE; FOR SHORT SWEEP ELEC.

• Replacement Sender
• Thread Size - 1/8 In. NPTF
• 2 in. Diameter

100 PSIg Brass Sensor Kit

• Brass sensors accurate to within 3% of full scale (pressure sensors)
• Connector and pins included
• Analog data scaled across full 100 PSI

Livewire TS / X4 Exhaust Gas Temperature Sensor Kit

• Plug And Play Monitoring
• Stainless Steel EGT Probe
• Simple Easy To Install And Set Up

Livewire TS+ Devices Programmer Cable

• Livewire TS+ Devices Cord

SPE-8711 Vacuum Sensor Adapter Kit

• Attach vacuum lines almost anywhere on intake tube
• Fits all popular vacuum lines and air sensors
• 2 hole saws: 5/8 inch and 7/8 inch

Bosch Replacement UEGO Sensor

• Never requires free-air calibration when used with an AEM Controller and connector plug.
• Connector and pins included
• Replacement sensor only

Sensor Docking Station w/Pyrometer Probe

• Sensor Docking Station

150 PSIg Stainless Sensor Kit

• Stainless-steel sensors accurate to within 1% of full scale (pressure sensors)
• Connector and pins included
• Analog Data Scaled in Charts

Pro-Flo Multi-Point Replacement Calibration Module

The Edelbrock 3519 is a new calibration module that will be a replacement or service part for any Pro-Flo kit.

3.5 Bar Stainless MAP Sensor Kit

• Accurate to 1% margin of error.
• Includes 1/8"NPT to -4 AN adapter and barbed fitting.
• Weather resistant connector and pins included

Dodge Cummins Unlock Cable

• Unlock Cable

Coolant Temperature Sensor for Pro-Flo and E-Street Systems

Edelbrock part #36012 Coolant Temp Sensor for E-Street and Pro-Flo 3 & Pro-Flo 4 systems.

Dynomation-5 Wave Action Engine Simulation Software

Look inside a running engine, and learn where and how it makes power with Dynomation-6 Wave Action Simulation.

5ft. HDMI and Power wire extension kit

• HDMI Cable
• 20 Gauge Power Wire
• Butt Connector For Power Wire Extension

6 Channel CAN Module

• Two (2) dedicated 0-5V analog inputs
• One (1) tachometer/coil input
• Protected inputs

Cummins Bypass cable

• ByPass Cable

X-Series AEMnet Can Bus Gauge Kit

• User selectable units of measurement (US or Metric)
• User selectable wideband measurements (AFR or Lambda)
• Compatible with 16v vehicle systems

X-Series OBDII Gauge Kit

• Reads and clears Diagnostic Trouble Codes (DTCs)!
• Auto dimming sensor delivers ideal display brightness
• Positive locking connectors provide secure connection

Ethanol Content Flex Fuel Sensor Kit (3/8" Barb)

• Accurate with 3% margin for error.
• Weather resistant connector and pins included
• Analog Data Scaled in Charts

GAUGE; PRESSURE; 2 5/8in.; 300PSI; LIQUID FILLED MECH; PRO-COMP

• Mechanical Instruments Provide Unmatched Accuracy
• No Electrical System Required For Gauge Operation
• Incl. Mounting Hardware/Instructions

GAUGE; WATER TEMP; 2 1/16in.; 120-240deg.F; MECHANICAL; ULTRA-LITE

• No Electrical System Required For Gauge Operation
• Incl. 1/2 in. NPT Adapter
• Incl. Mounting Hardware/Instructions

DeskTop Dyno5 Software

DeskTop Dyno 5

FAE Wideband "Replacement" Sensor

• Replacement for 0300 with 0400 serial number
• Improved durability compared to Bosch 4.9.
• Faster response time.

OBD-II Splitter Cable

• Plug and Play
• OBDII connection
• Great addition

3.5 BAR Brass MAP Sensor Kit

• Accurate with 3% margin for error.
• Weather resistant connector and pins included
• Analog Data Scaled in Charts

Air Temp Sensor Kit

• Weatherproof connector
• Connector and pins included
• Temp scale of -20C to 150C / -4F to 302F

AMP-LINK DATA DOWNLOAD SOFTWARE

• Compatible w/24V Charging And Starting Systems
• Incl. Battery Bank Test
• Advanced Digital Pulse Load Technology

EFI Coolant Temp Sensor

Edelbrock part #3589 Pro-Flo EFI replacement coolant temperature sensor is available for Pro-Flo and Pro-Flo XT EFI systems, Brass, Natural, 3/8 in.

Ford Oil Pressure Bushing Kit

Our brass angled-bushing kits allows for easy installation on most GM or Ford engines.

Front Low Voltage VCU300 Harness

• Braided harness.
• Label with color coded wires.
• Prewired communications port.

inTune i2/i3 Replacement Cable

• Works with later i1000 devices
• Plug and play design
• Easy installation

Manifold Absolute Pressure (MAP) Sensor for First Generation Pro-Flo Systems)

The Edelbrock #3587 is a 1-Bar MAP sensor for use with first generation Edelbrock Pro-Flo EFI systems.

Pressure Sensor - 0-75 PSI - With Harness

If you are looking for accurate AFR readings Pre-turbo or just want to know what your back pressure is then the 7767 is for you.

Temperature Sensor

• M12 x 1.5 thread size
• For use with Classic Instruments gauges

USB CABLE AND STRAIN RELIEF KIT

Auto Meter has been driven to provide performance enthusiasts with the information they need to win.

150 PSIg Brass Sensor Kit

• Accurate with 3% margin for error.
• Weather resistant connector and pins included
• Analog Data Scaled in Charts

22 Channel CAN Sensor Module

• Four Dedicated 0-5V analog inputs
• Four Temperature (thermistor) inputs
• One Tach Input

2 Bar Manifold Absolute Pressure (MAP) Sensor for Pro-Flo 2 Systems

The Edelbrock #36020 Pro-Tuner EFI Pressure Sensors are intended to be used with Edelbrock's Pro-Tuner EFI system, but may be used with other systems using the supplied connector and wiring.

2 Bar Stainless MAP Sensor Kit

• Accurate to 1% margin of error.
• 1/8"NPT to -4 AN adapter and barbed fitting included
• Weather resistant connector and pins included

5 BAR Brass MAP Sensor Kit

• Accurate with 3% margin for error.
• Weather resistant connector and pins included
• Analog Data Scaled in Charts

5 BAR Stainless Steel MAP Sensor Kit

• Stainless-steel sensors accurate to within 1% of full scale (pressure sensors)
• Connector and pins included
• Analog Data Scaled in Charts

7 BAR Stainless Steel MAP Sensor Kit

• Accurate with 1% margin of error.
• Includes 1/8" NPT to -4 AN adapter.
• Weather resistant connector and pins included

Advantage III Tuning Software

• Tune Like The Pros
• Built In Help Files
• Most Vehicles Supported

Air Temperature Sensor for Push-in Connections

The Edelbrock #3578 Air Temp Sensor is for push in connections.

AMP-LINK DATA DOWNLOAD SOFTWARE/CABLE KIT

Auto Meter has been driven to provide performance enthusiasts with the information they need to win.

Atomic, O2 Sensor Wideband

Atomic EFI Support Component

ATOMIC TBI, FUEL PRESSURE SENSOR -6 ORB

• -6AN O-ring boss threads
• Replacement fuel pressure sensor for Atomic EFI system

Battery Management System Master

• Can be daisy chained to multiple satellite units
• Capable of measuring up to 18 cells and 3 temperatures (thermistors)
• Weatherproof connector and housing

Battery Management System Satellite

• Connected to Master BMS as part of system
• Can be integrated into multiple satellite systems
• Weatherproof connector and housing

Bosch LSU 4.2 Wideband UEGO Installation Kit

• No calibration required when used with our gauges.
• Accurate to 0.1 AFR
• Sold as a kit

Bosch Replacement UEGO Sensor

• Never requires free-air calibration when used with an AEM Controller and connector plug.
• Connector and pins included
• Replacement sensor only

CamDisk8 Expansion Software

COMP Cams' part number 180908, CamDisk8 Expansion Software.

CAN Bus Data Logger

• 1KHz Configurable Logging Speed
• Extremely Compact at 2X2X1.5”
• 2 X Fully Configurable CAN Bus inputs

EAS Street Diesel Kit

• 1 EAS Starter Kit
• 1 EAS EGT PRobe
• 2 EAS 0-100psi Pressure Sensors

Eliminator 4-Bank Switch Chip Cable

• Single Or Multi-Program Chip

Exhaust Back Pressure Plumbing Kit

• Premade -4AN Speed-Flex Hose - 24” Long
• Cushion Clamp & Mounting Hardware - to Mount Sensor
• Use w/ Sensor 554-102 (available separately)

Exhaust Back Pressure Sensor Install Kit

• Allows you to mount wideband O2 sensors pre-turbo and get accurate AFR readings
• AEM High Performance Stainless Steel 100psig Sensor
• Includes all necessary hardware for ease of installation

Gateway Bypass Harness

• bypasses factory gateway module
• instals behind dash
• connects to STAR connectors

GPS Speed Sensor

• Simple wiring
• 8000 ppm or 16000 ppm output
• Compact size

MAP Sensor 3-bar for blown/turbo applications

• Applications up to 30lbs of boost.

MAP Sensor - 3 Bar Vacuum to 30PSI

• This sensor monitors manifold vacuum, varying output voltage to the ECU as a function of load placed on the engine…
• Highly accurate design

MAP Sensor Assembly for Atomic TBI

Atomic TBI factory replacement MAP sensor.

Power Grid 4-Connector Hub

This hub allows you to expand the Power Grid system with up to four accessory modules.

Transducer - Vacuum - (30 PSI)

Transducer

VCU 275 - Plug & Pin Kit

• Waterproof connectors
• Quick-connect connectors
• Weatherproof seals to keep contaminants out

1000 PSIg Stainless Sensor Kit

• Includes 1/8" NPT to -4 AN adapter included
• Stainless-steel sensors accurate to within 1% of full scale (pressure sensors)
• Connector and pins included

100 PSIg Stainless Sensor Kit

• Stainless-steel sensors accurate to within 1% of full scale (pressure sensors)
• Connector and pins included
• Analog Data Scaled in Charts

15 PSIa/1 Bar Stainless Sensor Kit

• Stainless-steel sensors accurate to within 1% of full scale (pressure sensors)
• Connector and pins included
• Analog Data Scaled in Charts

1-Bar MAP Sensor #36021 for Chevy LS3 applications

The new Edelbrock 1-Bar Manifold Absolute Pressure (MAP) Sensor #36021 is designed to fit Chevrolet LS3 applications that use an Edelbrock LS3 XT intake manifold or any other factory-style intake that has a 12mm MAP sensor port hole.

2000 PSIg Stainless Sensor Kit

• Accurate to 1% margin of error.
• Includes 1/8" NPT to -4 AN adapter included
• Weather resistant connector and pins included

500 PSIg Stainless Sensor Kit

• Accurate to 1% margin of error.
• Includes 1/8"NPT to -4 AN adapter and barbed fitting.
• Weather resistant connector and pins included

Advantage III Tuning Software

• Tune Like The Pros
• Built In Help Files
• Most Vehicles Supported