Engine Sensors

SENSOR; OIL PRESSURE; 0-100PSI; 1/8in. NPT MALE; FOR SHORT SWEEP ELEC.

• Replacement Sender
• Thread Size - 1/8 In. NPTF
• 2 in. Diameter

100 PSIg Brass Sensor Kit

• Brass sensors accurate to within 3% of full scale (pressure sensors)
• Connector and pins included
• Analog data scaled across full 100 PSI

Livewire TS / X4 Exhaust Gas Temperature Sensor Kit

• Plug And Play Monitoring
• Stainless Steel EGT Probe
• Simple Easy To Install And Set Up

SPE-8711 Vacuum Sensor Adapter Kit

• Attach vacuum lines almost anywhere on intake tube
• Fits all popular vacuum lines and air sensors
• 2 hole saws: 5/8 inch and 7/8 inch

Bosch Replacement UEGO Sensor

• Never requires free-air calibration when used with an AEM Controller and connector plug.
• Connector and pins included
• Replacement sensor only

150 PSIg Stainless Sensor Kit

• Stainless-steel sensors accurate to within 1% of full scale (pressure sensors)
• Connector and pins included
• Analog Data Scaled in Charts

3.5 Bar Stainless MAP Sensor Kit

• Accurate to 1% margin of error.
• Includes 1/8"NPT to -4 AN adapter and barbed fitting.
• Weather resistant connector and pins included

Coolant Temperature Sensor for Pro-Flo and E-Street Systems

Edelbrock part #36012 Coolant Temp Sensor for E-Street and Pro-Flo 3 & Pro-Flo 4 systems.

Ethanol Content Flex Fuel Sensor Kit (3/8" Barb)

• Accurate with 3% margin for error.
• Weather resistant connector and pins included
• Analog Data Scaled in Charts

2 Bar Manifold Absolute Pressure (MAP) Sensor for Pro-Flo 2 Systems

The Edelbrock #36020 Pro-Tuner EFI Pressure Sensors are intended to be used with Edelbrock's Pro-Tuner EFI system, but may be used with other systems using the supplied connector and wiring.

2 Bar Stainless MAP Sensor Kit

• Accurate to 1% margin of error.
• 1/8"NPT to -4 AN adapter and barbed fitting included
• Weather resistant connector and pins included

3.5 BAR Brass MAP Sensor Kit

• Accurate with 3% margin for error.
• Weather resistant connector and pins included
• Analog Data Scaled in Charts

5 BAR Brass MAP Sensor Kit

• Accurate with 3% margin for error.
• Weather resistant connector and pins included
• Analog Data Scaled in Charts

5 BAR Stainless Steel MAP Sensor Kit

• Stainless-steel sensors accurate to within 1% of full scale (pressure sensors)
• Connector and pins included
• Analog Data Scaled in Charts

7 BAR Stainless Steel MAP Sensor Kit

• Accurate with 1% margin of error.
• Includes 1/8" NPT to -4 AN adapter.
• Weather resistant connector and pins included

EAS Street Diesel Kit

• 1 EAS Starter Kit
• 1 EAS EGT PRobe
• 2 EAS 0-100psi Pressure Sensors

EFI Coolant Temp Sensor

Edelbrock part #3589 Pro-Flo EFI replacement coolant temperature sensor is available for Pro-Flo and Pro-Flo XT EFI systems, Brass, Natural, 3/8 in.

Exhaust Back Pressure Sensor Install Kit

• Allows you to mount wideband O2 sensors pre-turbo and get accurate AFR readings
• AEM High Performance Stainless Steel 100psig Sensor
• Includes all necessary hardware for ease of installation

Manifold Absolute Pressure (MAP) Sensor for First Generation Pro-Flo Systems)

The Edelbrock #3587 is a 1-Bar MAP sensor for use with first generation Edelbrock Pro-Flo EFI systems.

MAP Sensor 3-bar for blown/turbo applications

• Applications up to 30lbs of boost.

MAP Sensor Assembly for Atomic TBI

Atomic TBI factory replacement MAP sensor.

Temperature Sensor

• M12 x 1.5 thread size
• For use with Classic Instruments gauges

1000 PSIg Stainless Sensor Kit

• Includes 1/8" NPT to -4 AN adapter included
• Stainless-steel sensors accurate to within 1% of full scale (pressure sensors)
• Connector and pins included

100 PSIg Stainless Sensor Kit

• Stainless-steel sensors accurate to within 1% of full scale (pressure sensors)
• Connector and pins included
• Analog Data Scaled in Charts

150 PSIg Brass Sensor Kit

• Accurate with 3% margin for error.
• Weather resistant connector and pins included
• Analog Data Scaled in Charts