Fuel Systems

Fuel Level Sender

• 0 ohms empty, 30 ohms full
• Allow at least 1/4" clearance from end of tube to bottom of tank

Fuel Level Sender

• 0 ohms empty, 90 ohms full
• Allow at least 1/4" clearance from end of tube to bottom of tank

Fuel Level Sender

• Allow at least 1/4" clearance from end of tube to bottom of tank
• 0 ohms empty, 90 ohms full

Fuel Level Sender

• 75 ohms empty, 10 ohms full
• Allow at least 1/4" clearance from end of tube to bottom of tank

Fuel Line - Chrome

• Chrome Plated Steel
• Easy Installation
• 3/8" NPT Inlet

Fuel Pressure Regulator

Edelbrock Fuel Pressure Regulator #3584 for Pro-Flo 2 and Pro-Flo XT EFI systems.

Fuel Pump

• Universal design fits most applications
• Eliminates vapor lock and flooding
• For use with 5/16 inch fuel lines

Fuel Pump Safety Pressure Switch

• Safety pressure switch that reads oil pressure
• Will shut off fuel pump when oil pressure drops below 5 psi
• Includes detailed instructions

Fuel Rail Stands for Pico Injectors

The Edelbrock #3619 Fuel Rail Spacer Kit includes 'U-shape' brackets that are the proper height (1.37) for mounting Pico-style (1.50" O-ring Spacing) fuel injectors to any of our Victor EFI style intake manifolds

Fuel Supply System

• Incl. Edelbrock Fuel Pressure Regulator PN" "1727" "
• Includes Edelbrock Electric Fuel Pump PN" "1792" "

Fuel Supply System

• Incl. Edelbrock Fuel Pressure Regulator PN" "3594" "
• Includes Edelbrock Electric Fuel Pump PN" "1792" "

Gas Jet Extension

Gas Main Jet Extension (1/4") - Sold in pairs - Comes with replacement non-stick fuel bowl gasket

Gasket Set for Performer and Thunder Series Carbs

The Edelbrock #1472 Gasket set is a complete set of gaskets for the EPS, AVS and AVS II series of Edelbrock carburetors.

Hand Adjustable Throttle Stop Screw

• Genuine Holley Quality Parts

Heat Insulator Gaskets for Edelbrock Dual-Quad Manifolds - 0.125" Thick (Qty 2)

The Edelbrock Square-bore Dual Quad Heat Insulator Gaskets #9267 are designed to prevent percolation on Thunder Series and Edelbrock Performer Series Carburetors exposed to extreme under hood temperatures.

High Flow In-Tank Fuel Pump

• Maintains very high flow even at boosted fuel pressures; 330+ LPH (70 PSI, 13.5V) (30 psi boost)
• Highly efficient - pumps draw only 12A @ 40 PSI and 15A @ 70 PSI
• Both models feature a 9mm outlet barb with an 11mm inlet in-line with the outlet

High Flow Needles and Seats - .110"" (Qty 2)

The Edelbrock #1466 High Flow Needle and Seats includes a pair of needles and .110" seats.

Hose Clamp

• Rubber Covered Hose Loop
• Spring Steel Tab Mount

HP Main Body Retro Fit Kit

• All Necessary Parts Are Included
• Simple Installation With Common Hand Tools
• Eligible For Holley Contingency Programs

HYDRAMAT (3X8) 19MM Center

• Unique internal reservoir assists in keeping fuel available at the pickup even under extreme fuel slosh conditions
• Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump
• Can be folded and compressed for easy installation through a variety of fuel cell openings

HYDRAMAT (3X8) 19MM Offset

• Unique internal reservoir assists in keeping fuel available at the pickup even under extreme fuel slosh conditions
• Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump
• Can be folded and compressed for easy installation through a variety of fuel cell openings

HydraMat® Install Magnet Kit

• Genuine Holley Quality Parts

Idle Mixture Screw Set for all Edelbrock Square-Bore Carburetors (Qty 2)

The Edelbrock Idle Mixture Screw Set #1496 includes a pair of idle mixture screws and springs for all Edelbrock square bore carburetors.

Idle Speed Screw Spring

IN-LINE FUEL PULSE DAMPER

• Fittings included for damper/regulator’s and direct mount dampers
• Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
• Assembled and tested in the USA