Fuel Systems

Chrome Steel Fuel Line With 3/8" Barbed End Inlet Without Fuel Filter

This Edelbrock #8126 Chrome Steel Fuel Inlet for Edelbrock carburetors provide a clean and custom plumbing solution.

High Flow In-Tank Fuel Pump

• In-tank design
• Each pump individually tested
• For gasoline vehicles

Carburetor Throttle Ball Assortment

The Edelbrock #12413 Carburetor Throttle Ball Assortment comes with 4 different carburetor ball studs, supplied with hardware.

Universal Carburetor Choke Cable with Polished Knob

This universal push/pull cable is intended for use with Edelbrock 2 and 4 barrel carburetors equipped with a manual choke.

Replacement Fuel Filter

• Clear housing for easy viewing
• Replaceable inner filter element design
• For non fuel injected applications

Universal Micro Electric Fuel Pump - 30 GPH / 114 LPH (Gasoline/E85)

Edelbrock part #17303 fuel pump is a gravity fed type pump with a simple 2 wire design.

Chromed Steel Fuel Line & Filter Kit Fo Eps Carbs

This Edelbrock #8134 Chrome Steel Fuel Inlet for Edelbrock carburetors provide a clean and custom plumbing solution.

Universal Micro Electric Fuel Pump - 38 GPH / 144 LPH (Gasoline/E85)

Edelbrock part #17301 fuel pump is a gravity fed type pump with a simple 2 wire design.

3" Aluminum Street Fuel Filter in Black Finish

Edelbrock part #8157 Aluminum Street Fuel Filter feature a sintered-bronze 40-micron element that can be cleaned or replaced.

AVS2 Series Carburetor Calibration Kit

The AVS2 Series Carburetor Calibration Kit #1948 is for tuners looking to custom-tune the performance of their #1905 or #1906 carburetor.

Metering Block/ Fuel Bowl Gasket Pack

• Blue Non-Stick
• 2 Of PN 108-89
• 2 of PN 108-83

Replacement Filter Element for #17301 and #17303 (40 micron)

Edelbrock part #17311 fuel filter is a replacement filter element for #17301 and #17303 Universal Micro Electric Fuel Pumps.

Heat Insulator Gasket for Open 4150 Square-Bore - 0.320" Thick

The Edelbrock Square-bore Heat Insulator Gasket #9266 is designed to prevent percolation on Edelbrock Performer Series carburetors exposed to extreme under hood temperatures.

Heat Insulator Gasket for Divided 4150 Square-Bore - 0.320" Thick

The Edelbrock Square-bore Heat Insulator Gasket #9266 is designed to prevent percolation on Edelbrock Performer Series Carburetors exposed to extreme under hood temperatures.

Hose, 30', 20946

• 1/4 In Diameter
• D.O.T. Approved Black Synflex Air Line
• 30 ft. Increment

AVS2 800 CFM #1913 Carburetor, Elec. Choke for High-Horsepower Engines

Edelbrock's Annular Flow Booster technology brings superior fuel atomization to all high-horsepower small- and big-block engines with the AVS2 800 CFM Electric Choke Carburetor #1913 that is specially calibrated to make power.

Bull Nosed Carburetor Stud Kit in Black Oxide Finish

• Carburetor Stud Kit #8056 Black Oxide Finish 5/16-18 x 1 1/2in
• Edelbrock Carb Mounting Studs Washers/Nuts, Set Of 4.

Carb Adapter for 4150 Square-Bore to Stock Quadrajet & Thermo-Quad Spread-Bore

The Edelbrock Square-bore Carb to Spread-bore Manifold Adapter #2696 is designed to allow installation of the Edelbrock Performer Series carburetor on vehicles with the OEM (original equipment) spread-bore intake manifold (typically GM vehicles that were originally equipped with the Rochester Quadrajet carburetor).

Square-Bore to Spread-Bore Adapter Plate .100" thick for Edelbrock Manifolds

The Edelbrock Square-Bore to Spread-Bore Adapter #2732 adapts square-bore carbs to spread-bore carb pad on Edelbrock intakes.

High Flow Inline Fuel Pump

• Designed for high output naturally aspirated and forced induction EFI vehicles
• Installs externally or in-tank
• Each pump individually tested to flow minimum of 400LPH (100gph) @ 40 PSI

AVS2 Series Carburetor Calibration Kit

The AVS2 Series Carburetor Calibration Kit #1949 is for tuners looking to custom-tune the performance of their AVS2 Series #1912 (manual choke) or #1913 (electric choke) 800 CFM carburetor.

Step-Up Spring Assortment Includes 5 Different Springs (Qty 2)

The Edelbrock #1464 Step-Up Spring Assortment includes 3" Hg (blue), 4" Hg (yellow), 5" Hg (orange), 7" Hg (pink) and 8" Hg (plain) Springs.

Carburetor Rebuild & Maintenance Kit for All Edelbrock Square-Bore Carbs

The Edelbrock 1477 rebuild kit is a complete kit that is needed to rebuild any Edelbrock square-bore carburetor.

3" Aluminum Street Fuel Filter in Chrome Finish

Edelbrock part #8136 Aluminum Street Fuel Filter feature a sintered-bronze 40-micron element that can be cleaned or replaced.

Performance Carb Base Gasket - Open Center,Bulk Packaged w/UPC Label

• 1/16" Thick
• Precision Die Cut For Excellent Seal And Fit
• Can Be Trimmed If Necessary

Fuel Filter

• Bi-Directional Filters
• Flows Up To 130 GPH
• Rated At 70-75 PSI

Uni-Syn "A" Carburetor Balancing Instrument for 1 and 2-bbl with Round Top

Edelbrock UNI-SYN "A" Carburetor Balancing instrument

Carburetor Throttle Ball Assortment

• Kit Contains Four Different Throttle Balls and Hardware.

AN to Pipe

• 6061-T6 Aluminum
• Precision Machined

400LPH (Metric) Inline High Flow Fuel Pump

• Designed for high output naturally aspirated and forced induction EFI vehicles
• Installs externally or in-tank
• Each pump individually tested to flow minimum of 400LPH (100gph) @ 40 PSI

Fuel Line - 3/8 Inch Dual Inlet - Chrome

Dual-inlet Holley 4150 4-barrel carburetors with 3/8 inch hose & 9-5/16 inch spacing.

3" Aluminum Street Fuel Filter in Red Finish

Edelbrock part #8139 Aluminum Street Fuel Filter feature a sintered-bronze 40-micron element that can be cleaned or replaced.

Electric Choke Conversion Kit for Performer Series Carburetors

The Edelbrock Electric Choke Kit #1478 is designed to convert manual choke Edelbrock Performer series carburetor to electric choke.

High Flow In-Tank Fuel Pump

• Tested to flow 340 lph @ 40 PSI
• Each pump individually tested
• In tank design

Vapor Guard™ Hose

• Fuel Injection Hose – Rated Maximum 225 PSI

Perf Carb Base Gasket - 4-Barrel,Square Flange,Open Center,Bulk Packed

• High-Temperature Composite Gasket Material
• Provides Excellent Torque Retention
• Can Be Trimmed If Necessary

6 AN Rochester 2 bbl carb fuel inlet fitting

Edelbrock part #8080 Brass Hose Fitting is a 1/4-18" NPT fitting with a 3/8" barb.

Black Steel Fuel Line With 3/8" Barbed End Inlet And Without Fuel Filter

This Edelbrock #81263 Black Steel Fuel Inlet for Edelbrock carburetors provide a clean and custom plumbing solution.

Fitting 1/4" PTC-1/4" FNPT

• Limited Warranty 2 Year
• Made In USA
• Female-1/4 in. NPT

AN to Pipe

• 6061-T6 Aluminum
• Precision Machined

AN to Pipe

• 6061-T6 Aluminum
• Precision Machined

Carburetor Accelerator Pump Assembly

The Edelbrock accelerator pump assembly part #1470 is designed for use with Edelbrock Performer Series 1400, 1403, 1404, 1405, 1406 EPS Carbs as well as 1801, 1802, 1803, 1804, 1805, 1806, 1825 and 1826 Thunder Series AVS carbs.

Throttle Return Spring Set - Dual Spring

• Stainless Steel Springs
• Chrome Plated Steel Bracket
• Universal design with small small bracket for simple installation

340LPH E85-Compatible High Flow In-Tank Fuel Pump

• Tested to flow 340 lph @ 40 PSI
• Each pump individually tested
• In tank design

Adjustable Fuel Pressure Regulator Rebuild Kit

• Universal to AEM Fuel Regulators
• Allows easy service of adjustable fuel pressure regulator
• Sold as a kit

Check Valve

• Features A 304 Stainless Steel Check Piston
• Positive O-Ring Incorporated Into Check Piston

SPE-5965 Fuel Filter

• Universal, inline
• Chrome plated
• Canister housing

Chrome Single Feed Steel Fuel Line With Polished Filter

This Edelbrock #8131 Chrome Steel Fuel Inlet for Edelbrock carburetors provide a clean and custom plumbing solution.

SPE-5945 Fuel Fitting

• Straight fuel hose fitting
• Triple chrome plated
• Easy to install

Universal Adjustable Fuel Pressure Regulator

• Adjustable from (20 - 120 PSI)
• CNC-machined from 6061-T6 billet aluminum
• Patent # 6,298,828