Fuel Systems

Replacement Fuel Filter

• Clear housing for easy viewing
• Replaceable inner filter element design
• For non fuel injected applications

Vapor Guard™ Hose

• Fuel Injection Hose – Rated Maximum 225 PSI

Fuel Line - 3/8 Inch Dual Inlet - Chrome

Dual-inlet Holley 4150 4-barrel carburetors with 3/8 inch hose & 9-5/16 inch spacing.

6 AN Rochester 2 bbl carb fuel inlet fitting

Edelbrock part #8080 Brass Hose Fitting is a 1/4-18" NPT fitting with a 3/8" barb.

Fuel Level Sender

• 240 ohms empty, 33 ohms full
• Allow at least 1/4" clearance from end of tube to bottom of tank

ProClassic II Hose

• Available In Sizes -4AN Thru -16AN
• High-Quality Nylon Fiber Braid
• Made Of Extruded CPE Synthetic Rubber

75 Series Pro-filter 2 8AN Male In/Out, 100 Micron Element With Black Finish

• high flow, low pressure drop
• Compatible with E85 fuels
• Carbureted or EFI applications

Carb Metering Rod #1956 Size .071 x .042 AVS2, Performer & Thunder Carbs (Pair)

The Edelbrock Metering Rods .071 X .042 Pair

Regulator Rebuild Kit

• Fuel Pressure regulator rebuild kit for Holley 12-840 regulator
• Includes diaphragm and spring

Fuel Filter Replacement Element

• Includes O-rings

Aluminum Manual Choke Conversion Kit - Shiny

• w/Gold Mounting Hardware
• Shiny Aluminum Finish

75 Series Pro-filter 2 10AN Male In/Out, 40 Micron Element With Black Finish

• high flow, low pressure drop
• Compatible with E85 fuels
• Carbureted or EFI applications

Adapter Fitting

• 37 Deg. Sealing Angle
• Lightweight Aluminum
• Precision Machined

Fuel Hose Kit

• Extra Adapters Included
• Includes 4 ft. Of -8 Hose
• Includes Two Full Flow Hose Ends

Fuel Level Sender

• 0 ohms empty, 90 ohms full
• Allow at least 1/4" clearance from end of tube to bottom of tank

SPE-2220 Pro-Plumb Fuel Filter

• Magna-clamp hose fittings for 3/8 inch fuel line
• White mesh filter makes dirt easy to see and maintain
• Red and blue design

19-1/4" - 20-1/4" Deep Tank (0-30 Ohm)

Quality, Service and Value are not new to us.

AN to Pipe

• 6061-T6 Aluminum
• Precision Machined

Precision-Flow Fuel Injector (42 lb/hr)

• Flow matched to 2%
• Multi-point Dynamic Flow Testing
• Excellent Fuel Atomization

Super Stock™ Hose

• Interior Braided Fabric Sheath

Auto-Flex Hose - Size 8 - 6 Ft. Length

• Textile Braid In Hose Liner

Auto-Flex Hose - Size 16 - 20 Ft. Length

• Textile Braid In Hose Liner

Accelerator Pump Nozzle Kit Includes: .024", .033", .043" Nozzles and Gaskets

The Edelbrock #1475 accelerator nozzle is designed for use with Edelbrock Performer Series as well as Thunder Series AVS carbs.

Float

• Genuine Holley Quality Parts

Fuel Line - 3/8 Inch Dual Inlet - Chrome

• Has Silver Brazed Connections
• Chrome Plated 3/8" copper Tubing
• Hex Design Fittings