Fuel Systems

SPE-5764 Carburetor Spacer

• 1 inch thick to help increase air/fuel velocity
• Gaskets and hardware included
• Easy to install

SPE-5769 Carburetor Spacer

• 2 inch spacer with open design
• Designed to improve high range power
• Gaskets and hardware included

Carburetor Spacer - 1 Inch - Aluminum

• Improve Air/fuel Distribution For Added Power
• Spacing The Carburetor Can Resolve Clearance Issues
• Easy No Hassle Type Installation

Carburetor Spacer #8719 Open Center 3/4in Thick

The Edelbrock Carburetor Spacer #8719 is an open design used to add more plenum volume or add more distance from carb-to-plenum floor distance.

Base Insulator

• 1 3/8" Primary
• Phenolic
• 11/16" Thick

Carburetor Spacer #8711 4-Hole 1in Thick

The Edelbrock Carburetor Spacer #8711 4-hole design enhances low-rpm torque and throttle response and dampen reversion effects on the carb.

Carburetor Spacer #8718 Open Cloverleaf Center 1in Thick

The Edelbrock Carburetor Spacer #8718 is an open design used to add more plenum volume or add more distance from carb-to-plenum floor distance.

Carburetor Spacer #8724 Open Center 1/2in Thick

The Edelbrock Carburetor Spacer #8724 is an open design used to add more plenum volume or add more distance from carb-to-plenum floor distance.

Intake Manifold Spacer

• Cast Aluminum
• Dominator To Square Bore
• 2 1/4" Height

SPE-5776 Carburetor Spacer

• For Holley, Edelbrock, Carter AFB carburetors
• Increases power by raising air/fuel velocity
• Gaskets and hardware included

Carburetor Spacer #8710 Open Center 1in Thick

The Edelbrock Carburetor Spacer #8710 is an open design used to add more plenum volume or add more distance from carb-to-plenum floor distance.

Carburetor Spacer #8712 Open Center 2in Thick

The Edelbrock Carburetor Spacer #8712 is an open design used to add more plenum volume or add more distance from carb-to-plenum floor distance.

Carburetor Spacer #8713 4-Hole 2in Thick

The Edelbrock Carburetor Spacer #8713 4-hole design enhances low-rpm torque and throttle response and dampen reversion effects on the carb.

Carburetor Spacer #8714 Divided Center 1in Thick For 2-Plane Manifolds

The Edelbrock Carburetor Spacer #8714 divided design is for use with Dual-Plane Design intake manifolds.

Carburetor Spacer #8715 Divided Center 1/2in Thick For 2-Plane Manifolds

The Edelbrock Carburetor Spacer #8715 divided design is for use with Dual-Plane Design intake manifolds.

Carburetor Spacer #8717 Open Center 1in Thick For Holley 4500 Series

The Edelbrock Carburetor Spacer #8717 is an open design used to add more plenum volume or add more distance from carb-to-plenum floor distance.

Carburetor Spacer #8720 Open Center 1in Thick

The Edelbrock Carburetor Spacer #8720 is an open design used to add more plenum volume or add more distance from carb-to-plenum floor distance.

Carburetor Spacer #8722 Divided Center 1/2in Thick

The Edelbrock Carburetor Spacer #8722 divided design is for use with Dual-Plane design intake manifolds.

Carburetor Spacer #8723 4-Hole 1/2in Thick

The Edelbrock Carburetor Spacer #8723 4-hole design enhances low-rpm torque and throttle response and dampen reversion effects on the carb.

Carburetor Spacer #8725 Divided Center 1/2in Thick

The Edelbrock Carburetor Spacer #8725 divided design is for use with Dual-Plane design intake manifolds.

Carburetor Spacer #8751 2-Hole 1/4in Thick For Edelbrock 94' & Stromberg 97'

This Edelbrock #8751 is a 1/4" heat insulator spacer kit for Edelbrock 94 Series and Stromberg 97 3-bolt carburetors.

Carburetor Spacer Kit - 1 Inch Ported Center

• Fits Holley And Carter Square Bore Carburetors
• 1 Inch Height
• Light Weight Design w/ edges Open & Ribbing

Carburetor Spacer Kit - 1 Inch with 3/8 Inch PCV Tube

• Increases power, torque and performance
• Includes mounting hardware
• 1˝ Open Center w/3⁄8˝ PCV tube

Carburetor Spacer Kit - Open Center - Aluminum - 2 Inch

2 inch Open Center.

Moto-Lift Engine Lift Plate

• Aids in installation and removal of all V-type internal combustion engines
• Fabricated from heavy-gauge steel plate w/ Yellow Zinc Plated Finish
• Fits Most 2 & 4 Barrel Intake Manifolds