Fuel Systems

13-1/4" - 14-1/4" Deep Tank (0-30 Ohm)

Quality, Service and Value are not new to us.

15-1/4" - 16-1/4" Deep Tank (10-180 Ohm)

Quality, Service and Value are not new to us.

15" x 8" HydraMat®, Cross

• Works with Alcohol, Ethanol, Methanol, and E-85 fuels
• Works with 2-Cycle oil blends as high as 20:1
• Not for use with diesel fuels

16-1/4" - 17-1/4" Deep Tank (10-180 Ohm)

Quality, Service and Value are not new to us.

16-1/4" - 17-1/4" Deep Tank (1975-2010 Ohm)

Quality, Service and Value are not new to us.

16AN Straight Flare To 3/4" NPT Adapter Fitting With Black Finish

• 6061-T6 Aluminum
• Precision Machined

17-1/4" - 18-1/4" Deep Tank (0-30 Ohm)

Quality, Service and Value are not new to us.

19-1/4" - 20-1/4" Deep Tank (10-180 Ohm)

Quality, Service and Value are not new to us.

19 Lb/Hr Pico Fuel Injector (Qty 1)

The Edelbrock #3574 is a 19 pound-per-hour Fuel Injector for the ProFlo TBI to MPFI Conversion Systems.

20-1/4" - 21-1/4" Deep Tank (10-180 Ohm)

Quality, Service and Value are not new to us.

21-1/4" - 22-1/4" Deep Tank (10-180 Ohm)

Quality, Service and Value are not new to us.

21-1/4" - 22-1/4" Deep Tank (1975-2010 Ohm)

Quality, Service and Value are not new to us.

22-1/4" - 23-1/4" Deep Tank (10-180 Ohm)

Quality, Service and Value are not new to us.

22" Braided Fuel Line Kit

This Edelbrock Stainless Steel Braided Fuel Kit #8122 connects mechanical fuel pumps with 1/2" NPT outlets to Edelbrock Fuel Pressure Regulator Kits.

35 Lb/Hr Pico Fuel Injector (Qty 8)

The Edelbrock #3636 is a 35 pound-per-hour Fuel Injector for the ProFlo EFI Systems.

3" X 8" HydraMat®, Rectangle Center Outlet

• The outlet has 6 positions to orient the HydraMat for best location in the fuel cell
• Eliminates the need for specialty reservoirs, sumps and pick up pumps saving cost and greatly reducing complexity
• Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump

400LPH E85-COMPATIBLE HI FLOW IN-TANK FUEL PUMP - DOUBLE BARB

• Maintains very high flow even at boosted fuel pressures; 330+ LPH (70 PSI, 13.5V) (30 psi boost)
• Highly efficient - pumps draw only 12A @ 40 PSI and 15A @ 70 PSI
• Both models feature a 9mm outlet barb with an 11mm inlet in-line with the outlet

4150/4160 Flange Gasket 4 Hole 2

4150/4160 Flange Gasket 4 Hole

41 Lb/Hr Fuel Injector (Qty 8)

The Edelbrock #15807 is a 41 pound-per-hour Fuel Injector for the #1580, #1581, #1582, #1583 Edelbrock Supercharger Systems and is a optional Injector for #1585 and #1587 Edelbrock Kits.

4 AN Aluminum Tube Nut

• Blue Anodized Aluminum

50cc Accelerator Pump Conversion Kit

• Genuine Holley Quality Parts

50 Lb/Hr Fuel Injector (Qty 8)

The Edelbrock #15901 injectors are Bosch style, standard long length (60mm O-ring to O-ring dimension), and are high impedance 50 lb/hr at 43.5 psi (300 Kpa).

60 Lb/Hr Fuel Injector (Qty 8)

The Edelbrock #15903 is a 60 pound-per-hour Fuel Injector for the E-Street TBI, ProFlo EFI, and Edelbrock supercharger systems.

6AN Male x 3/8" SAE Quick-Disconnect Female Threaded Cap Fitting, Blue - 25 Pack

• 6061-T6 Aluminum
• Positive Seal At Maximum Operating Pressures

6 AN Stainless Steel Tube Nut

• Available for Any Plumbing Situation And Many Custom Applications.