Performance Parts

Service Parts Replacement Rotors

• Purpose built castings manufactured from premium materials
• Curved vane design for optimum cooling
• Dynamic balanced for vibration free performance

Service Parts Replacement Rotors

• Purpose built castings manufactured from premium materials
• Curved vane design for optimum cooling
• Dynamic balanced for vibration free performance

Set of 16 PTFE Valve Seals for .500" Guide Size, 5/16" Valve Stem

< ul>< li> Fits: 5/16" Valve Stems - .500" Guides (.600" Seal Diameter)</li>< li> Valves Seals keep unwanted oil from entering the combustion chamber through clearance in the valve guides</li>< li> Smaller diameter than COMP Umbrella Seals to allow use with double springs</li></ul>

Set of 8 Metal Body Viton Valve Seals for .530" Guide Size, 5/16" Valve Stem

5/16 X .530 Viton Metal Body Seal 575 OD

Shackle Links; 1/2in. Thickness; 3-1/8in. Center-to-Center; 10 Pack

• Includes 10 Shackle Links
• 1-Year Limited Warranty
• Informative Full-Color Retail Packaging

Silver Gray 2-5/8" Cylinder Head Tempature Gauge

• Completely electric
• Easy to read 2 5/8" size
• Push button calibration

Speed-Flex Hose Size -3 Stainless Steel Braid - 10 FT

• -65° to +450° F Operating Temperature

Speed-Seal Hose End

• Unmatched Range-Configurations

SS4 Brake System Rear

• Powder Coated Finish
• Dual Seals, Dust/Weather & Pressure
• 1-Piece Slot, Drilled, Zinc-Plate Rotor

Straight 8.150" Long, .165" Wall, 7/16" Diameter Pushrod Set

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

Straight 9.550" Long, .165" Wall, 7/16" Diameter Pushrod

Hi-Tech Straight 9.550" Long, .165" Wall, 7/16" Diameter Pushrod - Single

Thread Brake Hub-Short; 10K-lb 8 on 6-1/2in.; 16-17-1/2in. Wheels; 5/8in. Studs;

• 10000 lbs. Axle Capacity
• 12-1/4 in. Brake Hub Size
• 5/8 in. Stud Size

Timing Chain 3110KT, 3110KT-5, 3110KT-10, 3125KT, 3121KT, 3110-5, 3110-10, 3120

Ideal for all street performance and race applications.

Trailer Suspension Hex Bolt; 1-1/8in. Diameter; 1-1/8in.-7 Thread; 6in. L.; 10 P

• Zinc-Plated Construction For Corrosion Resistance
• 1-Year Limited Warranty
• Ships In Durable Brown Box

Trailer Suspension Hex Lock Nut; 7/8in.-9 Thread Size; 10 Pack

• Includes 10 Suspension Nuts
• Easy DIY Installation
• 1-Year Limited Warranty

Tri Wing Tool

• Tri-Wing Drive Tool, Size 6
• Drop Forged and Tempered to Resist Wear
• Sold Individually

TUBING; NYLON; 1/8in.; 12FT. LENGTH; INCL. 1/8in. NPTF BRASS COMPRESSION FITTING

• 12 ft. Hose Length
• Burst Pressure 1000PSI
• Incl. Compression Ferrules

Universal Tube

• Two 6 inch straight sections with a 45 degree bend
• 4 inch outside diameter
• 0.065 inch thick 6063 aluminum alloy construction

V8 Red Steelie 5" Speedometer Gauge (140 MPH)

• V8 Red Steelie
• Stainless Low Step Bezel
• Curved Glass Lens

Valve Spring Shim Kit - 1.437" OD, .645" ID, .015", .030", .060" Thickness

This shim kit contains .015", .030" and .060" thick Valve Spring Shims with 1.437" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

Velocity Black 2-5/8" Transmission Temperature Gauge

• Temperature sending unit included
• Installation hardware included
• Full sweep provides increased accuracy

Velocity Black 4-5/8" Speedometer Gauge w/ Info Screen

• Velocity Black 4 5/8" Speedometer with information screen, 160 MPH, with a Black Low Step Bezel and a Flat Glass Lens.

Velocity White 2-1/8" Fuel Level Gauge

• Small 2 ⅛" hole size
• 0 ohms empty, 30 ohms full
• Flat glass lens

Velocity White 2-5/8" Air Fuel Ratio Gauge

• Full sweep provides increased accuracy
• Easy to read 2 5/8" size
• Push-button calibration

Velocity White 2-5/8" Outside Air Tempature Gauge

• Installation hardware included
• Easy to read 2 5/8" size
• Pushbutton calibration