Performance Parts

GAUGE; WATER TEMP; 2 1/16in.; 260deg.F; DIGITAL STEPPER MOTOR; CRUISER

• Hybrid Metal Dial
• 12 And 16 Volt Compatible
• Incl. 1/8 in. NPT Temp Sender

G/Stock 2-5/8" Water Temperature Gauge, APF-3/8

Quality, Service and Value are not new to us.

HD/Race Sprung 6 Pad Kit

• "Excellence in Performance", backed by the best one-year warranty in the industry!

High Energy 212/212 Hydraulic Flat CL Kit Kit International Harvester 304-392

CL-KIT - Cam and Lifter Kit Includes: Camshaft, Lifters, Assembly Lube, Decals and Instructions.

Hi-Tech 210 Radius 8.050" Long, .080" Wall, 3/8" Diameter Pushrod Set

Designed for high lift Applications where Pushrod and seat interference are problems at maximum lift, Hi-Tech 210& deg

Hi-Tech 7.800" Long, .080" Wall, 5/16" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 8.175" Long, .080" Wall, 3/8" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Temp Shrink Tubes 12mm x 200' 010833B200

• 3 To 1 Shrink Ratio
• High Temperature Rating
• Stays Flexible

ID Spring Locator - 1.540" OD, .640" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator Set of 16 - 1.500" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

LOADLIFTER 5000

• Easy To Install With Illustrated Installation Manual
• Class A Chassis Only
• Requires 9 Between Tire And Frame

Machined Steel Set of 100 - 7 Degree, 5mm, Single Groove Race Locks

Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running, but this isn't the case.

Magnum 8.700" Long, .080" Wall, 3/8" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.150" Long, .080" Wall, 3/8" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

MODULE; WIRING EXTENSION; FOR STEPPER MOTOR INCANDESCENT PYROMETER GAUGES

• Wire Extension Harness

Nostalgia VT 2-1/8" Exhaust Gas Tempature Gauge

• Small 2 1/8" hole size
• Push button calibration
• Completely electric

Nostalgia VT 3-3/8" Ultimate Speedometer Gauge

Quality, Service and Value are not new to us.

Pro+ Brake System Rear

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

Pro+ Brake System Rear

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

Pro+ Brake System Rear

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

Race Endurance 1.657" OD Conical Spring; 2.000" Installed Height; 1 Spring

Dual Conical Valve Springs.

Service Parts Replacement Rotors

• Purpose built castings manufactured from premium materials
• Curved vane design for optimum cooling
• Dynamic balanced for vibration free performance

Service Parts Replacement Rotors

• Purpose built castings manufactured from premium materials
• Curved vane design for optimum cooling
• Dynamic balanced for vibration free performance

Service Parts Replacement Rotors

• Purpose built castings manufactured from premium materials
• Curved vane design for optimum cooling
• Dynamic balanced for vibration free performance

Service Parts Replacement Rotors

• Purpose built castings manufactured from premium materials
• Curved vane design for optimum cooling
• Dynamic balanced for vibration free performance