Performance Parts

6 AN Male to 18mm x 1.50 Male

• Available for Any Plumbing Situation And Many Custom Applications.

6 AN Male to 5/8"-18 Male

• -6 AN Male to 5/8"-18 Male
• Metric O-Ring Inverted Flare
• Available for Any Plumbing Situation And Many Custom Applications

6AN Male x 3/8" SAE Quick-Disconnect Female Threaded Cap Fitting, Blue - 25 Pack

• 6061-T6 Aluminum
• Positive Seal At Maximum Operating Pressures

6-BTM Boost Timing Master

• 12-15 Volts, 7 Volt Start
• CARB E.O. Approved
• Supplied with rubber shock mounts

750A Dual Channel Analog Current Sensor

• Good accuracy for high and low current.
• The inner diameter is 21.55mm
• Operating Temperature Range of -40 to 257 Fahrenheit

7 Degree Steel Retainer for 3/8" Valve w/ 1.437"-1.500" Spring

1.030" Steel Retainer for use with #26120 valve springs and #600 valve locks.

7 Degree Steel Retainer Set of 100 for 3/8" Valve w/ 1.437"-1.500" Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

7 Degree Titanium Retainer for 26926 Spring w/ 8mm Valve Stem

Upgrading to these 7& deg

7 Degree Titanium Retainer for 7245 Dual Conical Spring

Upgrading to COMP Cams titanium valve spring retainers will often allow you to gain speed and power because titanium retainers are lighter and as strong as than most Steel ones.

7 Degree Titanium Retainer Set of 100 for 26926 Spring w/ 8mm Stem

Upgrading to these 7& deg

7 Degree Tool Steel Retainer for 8mm Valve, Spring w/ 1.290" O.D

These new Tool Steel Retainers from COMP Cams have a 7& deg

7 Degree Tool Steel Retainer for 8mm Valve w/ 26926 Springs

These new Tool Steel Retainers from COMP Cams have a 7& deg

7 Steel Retainer for 11/32" Valve w/ 26915/26918 Beehive Springs

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

7 Titanium Retainer Set of 16 for 11/32" Valve w/ 26915/26918 Beehive Springs

Upgrading to these 7& deg

7 Tool Steel Retainer for 11/32" Valve, Spring w/ 1.055" Valve Spring OD

These new Tool Steel Retainers from COMP Cams have a 7& deg

7 Tool Steel Retainer Set of 16, 8mm Valve, Spring w/ 1.250" O.D

These new Tool Steel Retainers from COMP Cams have a 7& deg

8AN Male Forged Y-Block

• Black Anodized

8AN Male to -6AN Male Forged Y-Block

• Available for Any Plumbing Situation And Many Custom Applications

8 AN Stainless Steel Tube Nut

• Available for Any Plumbing Situation And Many Custom Applications.

8 Forged "L" B-Nut / No Ext

• Replacement Component for Kits # AT101285ERL & AT101286ERL

8 Male to -6 Male Union Reducer

• Black Anodized

8mm Spiro-Pro Repair Kit 135 Degree Black

• Color: Black
• 135° repair wire kits have terminal and boot on OE end only
• HEI and socket style distributor ends provided in kits

8mm Spiro-Pro Repair Kit 90 Degree/180 Degree Black

• Color: Black
• Taylor repair wire kits provide easy replacement for damaged wire
• HEI and socket style distributor ends provided in kits

8mm Spiro-Pro Repair Kit 90 Degree/180 Degree Blue

• Color: Blue
• Taylor repair wire kits provide easy replacement for damaged wire
• HEI and socket style distributor ends provided in kits

90 Degree 5/8" Hose to 1/2" NPT Male Elbow

• Blue Anodized Aluminum