Performance Parts

5/8" Threaded Speedometer Cable for SCU

Cable, 5/8-inch threaded ends, fits most pre-1976 domestic vehicles.

5 BAR Stainless Steel MAP Sensor Kit

• Stainless-steel sensors accurate to within 1% of full scale (pressure sensors)
• Connector and pins included
• Analog Data Scaled in Charts

5in. 90deg. Bend Performance Exhaust Pipe

• Mandrel bent tubing for smoother transitions
• CNC precision robotic manufacturing techniques
• Durable corrosion-resistant stainless steel construction

5 Male to -4 Male Union Reducer - Stainless Steel

• Available for Any Plumbing Situation And Many Custom Applications.

5 X 11in. Oval Straight-Through Performance Exhaust Muffler

• 100% Stainless Steel
• Mufflers are Bi-Directional
• Delivers a Smooth, Deep Tone

60 Lb/Hr Fuel Injector (Qty 8)

The Edelbrock #15903 is a 60 pound-per-hour Fuel Injector for the E-Street TBI, ProFlo EFI, and Edelbrock supercharger systems.

6 AN Male to 14mm x 1.50 Male

• Black Anodized

6 AN Male to 18mm x 1.50 Male

• Available for Any Plumbing Situation And Many Custom Applications.

6AN Male x 3/8" SAE Quick-Disconnect Female Threaded Cap Fitting, Blue - 25 Pack

• 6061-T6 Aluminum
• Positive Seal At Maximum Operating Pressures

6AN ORB 40-70 PSI FUEL PULSE DAMPER

• Compatible with any fuel -- full anodized billet aluminum construction with stainless steel springs and fluorosilicone…
• Fittings included for damper/regulator’s and direct mount dampers
• 1/8" NPT port on body of damper/regulators and in-line dampers for easy installation of mechanical pressure gauge or…

6-BTM Boost Timing Master

• 12-15 Volts, 7 Volt Start
• CARB E.O. Approved
• Supplied with rubber shock mounts

75 Series Pro-filter 2 8AN Male In/Out, 10 Micron Element With Black Finish

• high flow, low pressure drop
• Compatible with E85 fuels
• Carbureted or EFI applications

75 Series Pro-filter 2 8AN Male In/Out, 40 Micron Element With Black Finish

• high flow, low pressure drop
• Compatible with E85 fuels
• Carbureted or EFI applications

76 Series Pro-filter 2 10AN Male In/Out, 100 Micron Element With Black Finish

• high flow, low pressure drop
• Compatible with E85 fuels
• Carbureted or EFI applications

76 Series Pro-filter 2 12AN Male In/Out, 40 Micron Element With Black Finish

• high flow, low pressure drop
• Compatible with E85 fuels
• Carbureted or EFI applications

76 Series Pro-filter 2 16AN Male In/Out, 40 Micron Element With Black Finish

• high flow, low pressure drop
• Compatible with E85 fuels
• Carbureted or EFI applications

7 Degree Steel Retainer Set of 100 for 3/8" Valve w/ 1.437"-1.500" Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

7 Degree Titanium Retainer for 26926 Spring w/ 8mm Valve Stem

Upgrading to these 7& deg

7 Degree Titanium Retainer for 7245 Dual Conical Spring

Upgrading to COMP Cams titanium valve spring retainers will often allow you to gain speed and power because titanium retainers are lighter and as strong as than most Steel ones.

7 Degree Titanium Retainer Set of 100 for 26926 Spring w/ 8mm Stem

Upgrading to these 7& deg

7 Steel Retainer for 11/32" Valve w/ 26915/26918 Beehive Springs

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

7 X 7in. Round Straight-Through Performance Exhaust Muffler

• 100% Stainless Steel
• Mufflers are Bi-Directional
• Delivers a Smooth, Deep Tone

8 AN Aluminum Tube Nut

• Available for Any Plumbing Situation And Many Custom Applications

8AN Male to -6AN Male Forged Y-Block

• Available for Any Plumbing Situation And Many Custom Applications

8 Forged "L" B-Nut / No Ext

• Replacement Component for Kits # AT101285ERL & AT101286ERL