Tuning & Engine Management

Coolant Temperature Sensor for Pro-Flo and E-Street Systems

Edelbrock part #36012 Coolant Temp Sensor for E-Street and Pro-Flo 3 & Pro-Flo 4 systems.

USB CABLE AND STRAIN RELIEF KIT

Auto Meter has been driven to provide performance enthusiasts with the information they need to win.

OBD-II Splitter Cable

• Plug and Play
• OBDII connection
• Great addition

Pro-Flo Multi-Point Replacement Calibration Module

The Edelbrock 3519 is a new calibration module that will be a replacement or service part for any Pro-Flo kit.

Advantage III Tuning Software

• Tune Like The Pros
• Built In Help Files
• Most Vehicles Supported

VCU275 Programmable Electric Vehicle Control Unit

• Full Integration of all EV sub-systems under one controller
• Accessory control of cooling pumps, cooling fans, lights and more
• Supports up to 2 Drive Motors and up to 1200V AEM BMS18 Systems

Dynomation-5 Wave Action Engine Simulation Software

Look inside a running engine, and learn where and how it makes power with Dynomation-6 Wave Action Simulation.

EAS Street Diesel Kit

• 1 EAS Starter Kit
• 1 EAS EGT PRobe
• 2 EAS 0-100psi Pressure Sensors

Manifold Absolute Pressure (MAP) Sensor for First Generation Pro-Flo Systems)

The Edelbrock #3587 is a 1-Bar MAP sensor for use with first generation Edelbrock Pro-Flo EFI systems.

Power Grid Power Module - Red

• Takes the place of 4 electromechanical relays
• Available in Red (P/N 7764) or Black (P/N 77643)
• Built-in overcurrent protection, no fuses needed

Eliminator 4-Bank Switch Chip Cable

• Single Or Multi-Program Chip

2 Bar Manifold Absolute Pressure (MAP) Sensor for Pro-Flo 2 Systems

The Edelbrock #36020 Pro-Tuner EFI Pressure Sensors are intended to be used with Edelbrock's Pro-Tuner EFI system, but may be used with other systems using the supplied connector and wiring.

GAUGE; EXHAUST PRESS; 2 1/16in.; 100PSI; DIGITAL STEPPER MOTOR; ULTRA-LITE

• 12 And 16V Compatible
• Incl. Mounting Hardware/Instructions
• Recommended Particle Trap Kit PN[5375]

GAUGE; EXHAUST PRESS; 2 1/16in.; 60PSI; MECHANICAL; ULTRA-LITE

• Incl. 1/8 in. To 1/4 in. NPT Adapter Fitting
• Direct Vehicle Exhaust Connection To Instrument
• Incl. Mounting Hardware/Instructions

Exhaust Back Pressure Plumbing Kit

• Premade -4AN Speed-Flex Hose - 24” Long
• Cushion Clamp & Mounting Hardware - to Mount Sensor
• Use w/ Sensor 554-102 (available separately)

Ford Oil Pressure Bushing Kit

Our brass angled-bushing kits allows for easy installation on most GM or Ford engines.

GAUGE; PRESSURE; 2 5/8in.; 600PSI; LIQUID FILLED MECH; PRO-COMP

• Mechanical Instruments Provide Unmatched Accuracy
• No Electrical System Required For Gauge Operation
• Incl. Mounting Hardware/Instructions

Manifold Absolute Pressure Sensor #3542 Upgrade For ProFlo4 Boosted Applications

Edelbrock part #3542 is a 2-Bar MAP sensor is an upgrade component for use with ProFlo4 boosted applications.

Advantage III Tuning Software

• Tune Like The Pros
• Built In Help Files
• Most Vehicles Supported

AMP-LINK DATA DOWNLOAD SOFTWARE

• Compatible w/24V Charging And Starting Systems
• Incl. Battery Bank Test
• Advanced Digital Pulse Load Technology

AMP-LINK DATA DOWNLOAD SOFTWARE/CABLE KIT

Auto Meter has been driven to provide performance enthusiasts with the information they need to win.

ATOMIC TBI, FUEL PRESSURE SENSOR -6 ORB

• -6AN O-ring boss threads
• Replacement fuel pressure sensor for Atomic EFI system

GAUGE; EXHAUST PRESS; 2 1/16in.; 100PSI; DIGITAL STEPPER MOTOR; PHANTOM

• 12 And 16V Compatible
• Incl. Mounting Hardware/Instructions
• Recommended Particle Trap Kit PN[5375]

GAUGE; EXHAUST PRESS; 2 1/16in.; 100PSI; MECHANICAL; Z-SERIES

• Direct Vehicle Exhaust Connection To Instrument
• Gauge Must Be Mounted Outside Of Vehicle
• Incl. Mounting Hardware/Instructions

PC ADAPTER; MD6

• PC Adapter