Tuning & Engine Management

Power wire

• Power Cable

Livewire / Livewire TS 2-Channel Analog Input Cable

• Enables Monitoring And Recording Of External Sensor Data

GT Universal OBD Block

• OBD Block

SENSOR; OIL PRESSURE; 0-100PSI; 1/8in. NPT MALE; FOR SHORT SWEEP ELEC.

• Replacement Sender
• Thread Size - 1/8 In. NPTF
• 2 in. Diameter

100 PSIg Brass Sensor Kit

• Brass sensors accurate to within 3% of full scale (pressure sensors)
• Connector and pins included
• Analog data scaled across full 100 PSI

Livewire TS+ Devices Programmer Cable

• Livewire TS+ Devices Cord

Livewire TS / X4 Exhaust Gas Temperature Sensor Kit

• Plug And Play Monitoring
• Stainless Steel EGT Probe
• Simple Easy To Install And Set Up

Bosch Replacement UEGO Sensor

• Never requires free-air calibration when used with an AEM Controller and connector plug.
• Connector and pins included
• Replacement sensor only

Coolant Temperature Sensor for Pro-Flo and E-Street Systems

Edelbrock part #36012 Coolant Temp Sensor for E-Street and Pro-Flo 3 & Pro-Flo 4 systems.

SPE-8711 Vacuum Sensor Adapter Kit

• Attach vacuum lines almost anywhere on intake tube
• Fits all popular vacuum lines and air sensors
• 2 hole saws: 5/8 inch and 7/8 inch

USB CABLE AND STRAIN RELIEF KIT

Auto Meter has been driven to provide performance enthusiasts with the information they need to win.

OBD-II Splitter Cable

• Plug and Play
• OBDII connection
• Great addition

Cummins Bypass cable

• ByPass Cable

Pro-Flo Multi-Point Replacement Calibration Module

The Edelbrock 3519 is a new calibration module that will be a replacement or service part for any Pro-Flo kit.

150 PSIg Stainless Sensor Kit

• Stainless-steel sensors accurate to within 1% of full scale (pressure sensors)
• Connector and pins included
• Analog Data Scaled in Charts

Advantage III Tuning Software

• Tune Like The Pros
• Built In Help Files
• Most Vehicles Supported

VCU275 Programmable Electric Vehicle Control Unit

• Full Integration of all EV sub-systems under one controller
• Accessory control of cooling pumps, cooling fans, lights and more
• Supports up to 2 Drive Motors and up to 1200V AEM BMS18 Systems

Dynomation-5 Wave Action Engine Simulation Software

Look inside a running engine, and learn where and how it makes power with Dynomation-6 Wave Action Simulation.

EAS Street Diesel Kit

• 1 EAS Starter Kit
• 1 EAS EGT PRobe
• 2 EAS 0-100psi Pressure Sensors

Manifold Absolute Pressure (MAP) Sensor for First Generation Pro-Flo Systems)

The Edelbrock #3587 is a 1-Bar MAP sensor for use with first generation Edelbrock Pro-Flo EFI systems.

Power Grid Power Module - Red

• Takes the place of 4 electromechanical relays
• Available in Red (P/N 7764) or Black (P/N 77643)
• Built-in overcurrent protection, no fuses needed

Eliminator 4-Bank Switch Chip Cable

• Single Or Multi-Program Chip

2 Bar Manifold Absolute Pressure (MAP) Sensor for Pro-Flo 2 Systems

The Edelbrock #36020 Pro-Tuner EFI Pressure Sensors are intended to be used with Edelbrock's Pro-Tuner EFI system, but may be used with other systems using the supplied connector and wiring.

GAUGE; EXHAUST PRESS; 2 1/16in.; 100PSI; DIGITAL STEPPER MOTOR; ULTRA-LITE

• 12 And 16V Compatible
• Incl. Mounting Hardware/Instructions
• Recommended Particle Trap Kit PN[5375]

GAUGE; EXHAUST PRESS; 2 1/16in.; 60PSI; MECHANICAL; ULTRA-LITE

• Incl. 1/8 in. To 1/4 in. NPT Adapter Fitting
• Direct Vehicle Exhaust Connection To Instrument
• Incl. Mounting Hardware/Instructions