Fuel Systems

Carb Adapter for 4150 Square-Bore to Stock Quadrajet & Thermo-Quad Spread-Bore

The Edelbrock Square-bore Carb to Spread-bore Manifold Adapter #2696 is designed to allow installation of the Edelbrock Performer Series carburetor on vehicles with the OEM (original equipment) spread-bore intake manifold (typically GM vehicles that were originally equipped with the Rochester Quadrajet carburetor).

Square-Bore to Spread-Bore Adapter Plate .100" thick for Edelbrock Manifolds

The Edelbrock Square-Bore to Spread-Bore Adapter #2732 adapts square-bore carbs to spread-bore carb pad on Edelbrock intakes.

SPE-5765 CARB Adapter

• Heat insulating phenolic center
• Precision die cast aluminum outer plate
• Gaskets and hardware included

Carb Adapter #8716 4150 Standard-Flange Carb to 4500 Manifold Flange 2 in.

The Edelbrock Standard Flange Adapter #8716 adapts 4150 Series standard-flange carburetor to 4500 Series intake manifold flange.

Carb Adapter for Edelbrock Square-Bore Carburetor to a stock 4-Jet/4GC Manifold

The Edelbrock Carburetor adapter #2695 adapts an Edelbrock square-bore carburetor to a stock 4-Jet / 4GC intake manifold.

Carb Adapter Mount 4-bbl Carter Thermo-Quad to Square-Bore Single Plane Manifold

The Edelbrock Carburetor Adaptor #2691 is designed mounts 4-bbl.

Carb Adapter Mounts 4150 Standard-Flange Holley Carbs Sideways on Tunnel Rams

The Edelbrock Standard-Flange Sideways Adapters #2694 mounts standard-flange Holley carbs sideways on Tunnel Rams.

Carb Adapter Mounts Quadrajet to Square Bore Single-Plane Manifold

The Edelbrock Carburetor Adaptor #2692 is designed mounts 4-bbl.

Quadrajet Carburetor Replacement Adapter Kit

The Edelbrock Square-bore Carb to Spread-bore Manifold Adapter #2697 is designed to allow installation of the Edelbrock Performer Series carburetor on vehicles with the OEM (original equipment) spread-bore intake manifold (typically GM vehicles that were originally equipped with the Rochester Quadra jet carburetor).

Spread-Bore Adapter Plate (.100" thick) for Edelbrock Manifolds Only

The Edelbrock Square-Bore Adapter Plate #2731 adapts spread-bore carbs to Edelbrock manifolds without regular mounting flange.

Competition Carb Adapter for Quadrajet to Square Bore Single-Plane Manifold

The Edelbrock Carburetor Adaptor #2693 competition adapter re-locates Q-Jet carbs 5/16" to the rear for improved fuel distribution on square-bore single plane intake manifolds.

SPE-5772 Carburetor Adapter

• Precision die-cast aluminum
• Gaskets and hardware included
• 7/8 inches thick