Engine Components

High Energy 6.248" Long, 5/16" Diameter Pushrod Set

High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

Hi-Tech 8.100" Long, .105" Wall, 5/16" Diameter Pushrod Set

With a 17 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech .105 Wall pushrods feature seamless chromemoly tubing that ensures even greater strength and durability.

Replacement Pivot Ball Set for Magnum Rockers w/ 7/16" Stud

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

UltraPro One Way Check Valve

• Body is Anodized Aluminum

10 Degree Superlock Steel Retainer Set of 100 for 1.500"-1.550" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Lightweight Titanium Retainer Set of 16 for 1.500"-1.550" OD Double Springs

Upgrading to these 10& deg

10 Steel Retainer Set of 16 w/ +.050" Installed Height for 26095 Beehive Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Tool Steel Retainer Set of 16 for All Valves w/ 1.095" O.D. Springs

These new lightweight 1.095" Spring Diameter Tool Steel Retainers from COMP Cams have a 10& deg

10 Tool Steel Retainer Set of 16 for All Valves w/ 1.250" O.D. Springs

These new 1.250" spring diameter Tool Steel Retainers from COMP Cams have a 10& deg

6-BTM Boost Timing Master

• 12-15 Volts, 7 Volt Start
• CARB E.O. Approved
• Supplied with rubber shock mounts

Black Powder-Coated Aluminum Vacuum Canister

A vacuum reserve canister captures an extra shot of vacuum from your engine for your power brakes.

Brake Booster Check Valve - Billet Aluminum - 90 Degree

• Fits Most Brake Boosters w/ .588" Port (Inside Diameter of the Grommet)

Digital Multi-Retard

• Magnetic pick-up compensation circuit
• Adjustable start retard
• Four stages of retard

DUAL SPRING, 1.546 OD, 1.950 IH, .800 LIFT, 638 LBS/IN, SUPERFINISH

COMP Cams' new 26944 dual valve springs are a product of innovative design and superior craftsmanship.

Endure-X Solid Roller Lifter w/ .842" Diameter, Right Pushrod Seat, .300" Taller

.300" Tall Roller lifter, cutaway body with oil band, .180" right offset, single lifter

Endure-X Solid Roller Lifter w/ .904" Diameter, Center Pushrod Seat, .300" Tall

.300" Tall Roller lifter, centered Pushrod seat, cutaway body with oil band, single lifter

Engine Valve Spring Kit

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

Engine Valve Spring Kit

Engine Valve Spring Kit

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

Hi-Tech One-Piece 8.050" Long, .135" Wall, 3/8" Diameter Pushrod

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg

Low-Mount LS Accessory Drive Bracket - Passenger's Side A/C Bracket

• Small Compact Accessory Brackets & Complete Kits
• Cost Effective Solution
• Also works on LSA supercharged engines

LS Accessory Drive Bracket - Installation Kit for Standard (Short) Alignment

• Aluminum construction
• Will not rust
• Lighter than steel brackets

LS/LT High-Mount Accessory Drive Bracket - Driver's Side P/S & Alt Bracket

• The most cost effective LS bracket solution on the market!
• Utilizes commonly available and affordable GM alternators and power steering pumps
• Ideal for crate engines, take out motors and engine builders!

Machined Steel Set of 16 - 7 Degree, 5/16", Single Groove Race Locks

Includes 16 Pairs of Machined Steel Race Locks: 1 Groove, 7& deg

Magnum Polylock Set for 3/8" Rocker Stud

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.