Engine Components

Dual Valve Spring with Damper, 1.442 OD, 1.800 IH, .600 Lift, 391 LBS/IN, FT/HR - Set

COMP Cams' new 26987 dual valve springs are a product of innovative design and superior craftsmanship.

Hardened Steel 7 Degree, 11/32", Single Groove Street Lock

Includes 1 Pair of hardened Steel Street Locks: 1 Groove, 7& deg

High Energy 8.234" Long, 5/16" Diameter Pushrod

High Energy pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

High Quality Rocker Studs 7/16" (Qty 16)

The Edelbrock high-quality rocker studs #8593 7/16" (Set of sixteen) are used in Edelbrock cylinder heads requiring screw-in studs.

Hi-Tech 11.000" Long, .080" Wall, 3/8" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech Rocker Stud w/ 7/16" Base Thread and 1/2" Rocker Thread

Hi-Tech Rocker Stud with 7/16" Base Thread and 1/2" Rocker Thread

Intake Valve for #60579, #61579 & #61599 Cylinder Heads

The Edelbrock #9781 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Low-Mount LS Accessory Drive Bracket - Driver's Side P/S & Alt Bracket Polished

• Fits Middle and Long Accessory Spacing
• Installation Kit 21-4 Required w/ Long Spacing
• Cost Effective Solution

Replacement Timing Chain for 2104 and 2109 Timing Sets

Heavy-duty, heat-treated true double Roller timing chain.

Replacement Timing Chain for 3212 Timing Set

Exceed all original equipment timing chain Specifications.

Retard Module Selector, 0°-11°

The Retard Module Selectors allow you to select between 12 retard amounts with the turn of a dial.

Service Parts and Hardware Kit for COMP Cams 291 Billet Valve Covers

• The sleek and durable DuPont Black-Wrinkle powder coat finish with polished laser etched logo is sure to provide that…

SET, DUAL SPRINGS W/ DAMPER, 1.560 OD, 1.950 IH, .760 LIFT, 500 LBS/IN, SR

Set of 12 - 10 Degree 11/32 Single Groove Locks w/o Lash Cap Recess +.050 Height

These Steel Super Locks with +.050 install height feature a 10& deg

Set of 12 Metal Body Viton Valve Seals for .500" Guide Size, 11/32" Valve Stem

11/32" Viton Metal Body Seal for use with Triple Spring with a Total OD of .546"

Set of 12 Metal Body Viton Valve Seals for .500" Guide Size, 5/16" Valve Stem

5/16 X .500 Viton Metal Body Seal .546 OD

Set of 12 Metal Viton Valve Seals for .500" Guide Size, 3/8 Valve Stem

3/8 x .500" Metal Body Viton Valve Seal

Set of 12 PTFE Valve Seals for .530" Guide Size, 11/32" Valve Stem

COMP Cams offers a complete line of valve stem Seals, from the stock GM "O-Ring" to the positive-stop PTFE Seal.

Spark Fitting

• Genuine Holley Quality Parts

SUPER VALVE LOCKS, +.050 11/32

COMP Cams Super valve locks are wider-angled 10 degree locks.

Titanium 10 Degree, 11/32", Single Groove Lock w/ Lash Cap Recess

This Titanium Super Lock with lash cap recess features a 10& deg

Valve Spring Shim - 1.640" OD, .650" ID .060" Thickness

These .060" thick Valve Spring Shims with 1.640" outside diameter and .635" inside diameter are used to equalize the installed height of valve springs.

Xlong Dowel Pins Chevy Sb And Bb

2" Long pins are a necessity for any application running a mid-mount plate

8 Degree Titanium Retainer Set for 7245 Dual Conical Valve Springs

7& deg

Engine Valve Spring

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.