Engine Components

Straight 7.400" Long, .165" Wall, 7/16" Diameter Pushrod

Hi-Tech Straight 7.400" Long, .165" Wall, 7/16" Diameter Pushrod - Single

Straight 7.950" Long, .165" Wall, 7/16" Diameter Pushrod Set

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

VALVE SPRINGS, 1.384" 2 SPRING

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

10 Degree, 3/8", Single Groove Lock w/ Lash Cap Recess, -.050" Height

This Steel Super Lock with .050 install height features a lash cap recess, 10& deg

10 Degree Steel Retainer Set of 100 for 26120 Beehive Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Degree Steel Retainer Set of 12 for 26095 Beehive Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Degree Superlock Steel Retainer Set of 100 for 1.500"-1.550" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Degree Tool Steel Retainer Set of 12 for All Valves w/ 1.095" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg

10 Superlock Steel Retainer for 1.500"-1.550" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

1.125" Tall Polylock Set for High Energy Rockers w/ 3/8" Stud

High Energyâ„¢ Aluminum Polylocks with 3/8" Stud diameter.

1.550" High Lift Dual Valve Spring for Racing Applications

1.520" OD Dual Spring

1 Black Viton Valve Seal for .425" Guide Size, 5/16" Valve Stem

1 Metal Body Viton Valve Seal for .500" Guide Size, 3/8" Valve Stem

3/8 X .500 Viton Metal Body Seal .540 OD

1 Metal Body Viton Valve Seal for .530" Guide Size, 3/8" Valve Stem

3/8 X .530 Viton Metal Body Seal .574 OD

1 Metal Body Viton Valve Seal for .530" Guide Size, 5/16" Valve Stem

5/16 X .530 Viton Metal Body Seal 575 OD

1 Metal Viton Valve Seal for .530" Guide Size, 5/16" Valve Stem

5/16 x .530" Metal Body Viton Valve Seal

2 SPRING ASSEMBLY, 1.536"

Our 954 Dual Valve Springs are perfect for street/strip and racing applications that need high spring pressures to handle aggressive cam profiles.

8 AN Plug

• Available for Any Plumbing Situation And Many Custom Applications.

8 AN Plug

• Available for Any Plumbing Situation And Many Custom Applications

Accessory Drive Replacement Hardware - Godzilla Alternator Bracket

• Direct replacement for Holley Godzilla accessory drive

BULK, DUAL SPRINGS W/ DAMPER, 1.442 OD, 1.800 IH, .600 LIFT, 391 LBS/IN, FT/HR

Carburetor Stud Kit #8006 Zinc Finish 5/16-18 x 1 1/4in (3 Pieces)

Edelbrock #8006 Carburetor Stud Kit for 3-bolt Flange carbs

Check Valve

• Unaffected By Most Lubes

Dual Taper 10.000" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Valve Springs with Damper, 1.555 OD, 1.950 IH, .760 Lift, 501 LBS/IN, HR

COMP Cams' new 26094 dual valve springs are a product of innovative design and superior craftsmanship.