Engine Components

10 Degree Tool Steel Retainer Set of 12for All Valves w/ 1.250" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg

10 Lightweight Titanium Retainer for 1.500"-1.550" OD Double Springs

Upgrading to these 10& deg

10 Superlock Steel Retainer for 1.437"-1.500" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Tool Steel Retainer for All Valves w/ 1.095" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg

10 Tool Steel Retainer for All Valves w/ 1.250" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg

10 Tool Steel Retainer for All Valves w/ 26955, 26956 and 26957 Springs

COMP Cams Lightweight Tool Steel Retainers for #26955, #26956, #26957 springs provide the best of all valve train benefits: light weight, as well as exceptional strength and wear characteristics.

1.125" Tall Polylock for High Energy Rockers w/ 7/16" Stud

High Energyâ„¢ Aluminum Polylock with 7/16" Stud diameter.

1.550" High Lift Dual Valve Springs for Racing Applications

1.520" OD Dual Spring

1 Metal Body Viton Valve Seal for .500" Guide Size, 11/32" Valve Stem

11/32" Viton Metal Body Seal for use with Triple Spring with a Total OD of .546"

1 Metal Body Viton Valve Seal for .500" Guide Size, 5/16" Valve Stem

5/16 X .500 Viton Metal Body Seal .546 OD

Check Valve

• Unaffected By Most Lubes

CYLINDER HEAD

• Bare Head
• For Big Block Chevy
• High Isostatic Pressing Design

Dual Valve Spring 1.560 OD, 1.900 IH, .740 Lift, 550 LBS/IN, Superfinsh

COMP Cams' new 26943 dual valve springs are a product of innovative design and superior craftsmanship.

Endure-X Solid Roller Lifter w/ .875" Diameter, Center Pushrod Seat, .300" Tall

.300" Tall Roller lifter, centered Pushrod seat, cutaway body with oil band, single lifter

Gear Set for International Harvester 304-392 V8 w/ Steel Cam Gear

Constructed from precision hobbed and crown shaved aluminum, Steel and fiber Gears.

Hardened Steel Set of 12 - 7 Degree, 3/8", Single Groove Street Locks

Includes 12 Pairs of hardened Steel Street Locks: 1 Groove, 7& deg

ID Spring Locator - 1.300" OD, .770 I.D, .100" Thickness - Single

Inverted Flare Plug

• Steel w/ Nickel Plated Finish
• 3/8"-24 Thread

LS Accessory Drive Bracket - Installation Kit for Middle Alignment

• Aluminum construction
• Will not rust
• Lighter than steel brackets

LS Accessory Drive Bracket - Installation Kit for Standard (Short) Alignment

• Aluminum construction
• Will not rust
• Lighter than steel brackets

LS High-Mount A/C Accessory Drive Bracket - Fits Sanden SD508 or SD7 Comp.

• The most cost effective LS bracket solution on the market!
• Utilizes commonly available and affordable GM A/C compressors
• Accepts GM R4 compressor (Sanden version now available)

Main Plate for 6500 & 6504

Main Plate for #6500 and 6504 Hi-Tech Belt Drive Systems

O-RING, FOR END PLAY ADJUSTING

• Long lasting durability

Race Extreme 1.683" OD Triple Springs; 2.100" Installed Height; 16 Springs

Elite Race Triple Valve Springs from COMP Cams have an .800" to .900" maximum lift and outside diameter of 1.680".

Replacement Timing Chain for 2121, 2108 and 2113 Timing Sets

Heavy-duty, heat-treated true double Roller timing chain.