Engine Components

Intake Valves for 60679, 60699, 61669 & 61649 Heads

The Edelbrock #93771 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for #60779 & #60179 Cylinder Heads

The Edelbrock #9366 Intakes Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for #60809 & #60819 Cylinder Heads

The Edelbrock #93781 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for #61459, #61559 & #61555 Cylinder Heads

The Edelbrock #97041 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Lower Gear for 6100 Belt Drive

Lower Gear for 6100

LS High-Mount A/C Accessory Drive Bracket - Fits Sanden SD508 or SD7 Comp.

• The most cost effective LS bracket solution on the market!
• Utilizes commonly available and affordable GM A/C compressors
• Accepts GM R4 compressor (Sanden version now available)

LS High-Mount A/C Accessory Drive Bracket - Passenger's Side A/C Bracket

• The most cost effective LS bracket solution on the market!
• Utilizes commonly available and affordable GM A/C compressors
• Accepts GM R4 compressor (Sanden version now available)

LS/LT High-Mount Accessory Drive Bracket

• The most cost effective LS bracket solution on the market!
• Simple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets
• A/C bracket accepts GM R4 compressor (Sanden version now available)

LS/LT High-Mount Accessory Drive Bracket - A/C, P/S & Alt Brackets

• The most cost effective LS bracket solution on the market!
• A/C bracket accepts GM R4 compressor (Sanden version now available)
• Ideal for crate engines, take out motors and engine builders!

Magnum 7.450" Long, .080" Wall, 3/8" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 7.700" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.200" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.250" Long, .080" Wall, 3/8" Diameter Pushrod Set of 8

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.750" Long, .080" Wall, 3/8" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum Rocker Stud Set w/ 7/16" Base Thread and 7/16" Rocker Thread

COMP Cams takes pride in having the finest Rocker arm Studs available on the market.

MANIFOLD-BRACKET KIT, LT4 DRY-BLACK

• Genuine Holley Quality Parts

Mid LSA Accessory Drive Bracket Kit - Alternator - Black

• Compatible with all Holley Alternators
• Compatible with Holley P/N 20-160 compact SD7 A/C kit
• Compatible with LSA and 2010-15 LS Camaro water pumps

Mid LSA Accessory Drive Bracket Kit - Alternator - Natural

• Compatible with all Holley Alternators
• Compatible with Holley P/N 20-160 compact SD7 A/C kit
• Compatible with LSA and 2010-15 LS Camaro water pumps

Mid LSA/LS Accessory Drive Bracket Kit - Power Steering - Natural

• P/S hard line adapters available (197-207)
• Compatible with Holley P/N 20-160 compact SD7 A/C kit
• Compatible with LSA and 2010-15 LS Camaro water pumps

Performance Exhaust Gasket Material

• Withstands Extreme Exhaust Heat
• Superior Tensile Strength
• Resists Deteriorating

Performance Intake Gasket Material

• Conforms well to irregular flange surfaces
• Very good crush resistance at high flange pressures
• Bulk sheet easily cut for making custom gaskets

Performer Series Retainer (Qty 16)

These retainers are designed to be used with springs featuring 1.55" O.D. and 1.125 I.D.

Pushrod Seat Removal Tool

With our Pushrod Seat Insert Removal Tool for Elite Raceâ„¢ Solid Roller Lifters, removing the Pushrod seat inserts and swapping them out is a simple process that allows the user to easily adjust the Pushrod angle.

Race Endurance 1.551" OD Dual Spring; 2.000" Installed Height; 1 Spring

Elite Race Double Valve Springs from COMP Cams have a .750"+ maximum lift and outside diameter of 1.680".

Race Endurance 1.560" OD Dual Springs; 2.050" Installed Height; 16 Springs

Elite Race Double Valve Springs from COMP Cams have a .700" to .800" maximum lift and outside diameter of 1.549".