Engine Components

Hi-Tech One-Piece 9.250" Long, .135" Wall, 3/8" Diameter Pushrod Set of 8

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg

HRT Turbo

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines.

Replacement Timing Chain for 2100 and 2136 Timing Sets

Replacement Timing Chain for 2100 and 2136 Magnum Timing Sets

Stud Girdle Adjusting Nut Set of 12 for 3/8" Stud w/ (4) 4509S Snap Rings

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

7 Steel Retainer Set of 16 for 11/32" Valve w/ 26915/26918 Beehive Springs

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

Hi-Tech Polylock Set for 1/2" Stud Ultra Pro Magnum Rockers

Hi-Tech Polylocks/Adjusting Nuts, 1/2" Stud for Ultra Pro Magnum/Ultra Pro Magnum XD Rockers - Set of 16

LS High-Mount A/C Accessory Drive Bracket - Fits Sanden SD508 or SD7 Comp.

• The most cost effective LS bracket solution on the market!
• Utilizes commonly available and affordable GM A/C compressors
• Accepts GM R4 compressor (Sanden version now available)

Replacement Timing Chain for 2120, 2131, 2138 and 2135 Timing Sets

Replacement Timing Chain for 2120, 2131, 2135 and 2138 Magnum Timing Sets

10 Superlock Steel Retainer Set of 16 for 1.500"-1.550" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

Magnum 7.900" Long, .080" Wall, 3/8" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Set of 16 PTFE Valve Seals for .530" Guide Size, 3/8" Valve Stem

Fits: 3/8" Valve Stems - .530" Guides (.630" Seal Diameter).

CONICAL SPRING, 1.445/1.660 OD, 1.900 IH, .750 LIFT, 400 LBS/IN, SUPERFINISH, HR

Dual Taper 7.850" Long, .165" Wall, 7/16" Diameter Pushrod

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 8.850" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.100" Long, .165" Wall, 7/16" Diameter Pushrod

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Endure-X Solid Roller Lifter w/ .875" Diameter, Left Pushrod Seat, .300" Taller

.300" Tall Roller lifter, .180" left offset Pushrod seat, cutaway body with oil band, single lifter

Engine Valve Spring

Dual Valve Springs from COMP Cams are manufactured from H11 material and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter the application.

Engine Valve Spring Kit

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

High Energy 212/212 Hydraulic Flat CL Kit Kit International Harvester 304-392

CL-KIT - Cam and Lifter Kit Includes: Camshaft, Lifters, Assembly Lube, Decals and Instructions.

Hi-Tech 10.250" Long, .080" Wall, 3/8" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Machined Steel Set of 100 - 7 Degree, 5mm, Single Groove Race Locks

Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running, but this isn't the case.

Race Endurance 1.565" OD Dual Springs; 2.000" Installed Height; 16 Springs

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

Race Extreme 1.635" OD Dual Spring; 1.950" Installed Height; 1 Spring

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

Set of 12 Metal Body Viton Valve Seals for .530" Guide Size, 5/16" Valve Stem

5/16 X .530 Viton Metal Body Seal 575 OD

Straight 8.150" Long, .165" Wall, 7/16" Diameter Pushrod Set

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.