Engine Components

10 Tool Steel Retainer Set of 16 All Valves w/ 1.500"-1.550" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg

10 Tool Steel Retainer Set of 16 All Valves w/ 1.500"-1.550" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg

10 Tool Steel Retainer Set of 16 for All Valves w/ 1.095" O.D. Springs

These new lightweight 1.095" Spring Diameter Tool Steel Retainers from COMP Cams have a 10& deg

1.125" Tall Polylock for High Energy Rockers w/ 3/8" Stud

High Energyâ„¢ Aluminum Polylock with 3/8" Stud diameter.

1 Black Viton Valve Seal for .494" Guide Size, 11/32" Valve Stem

COMP Cams offers a complete line of valve stem Seals, from the stock GM "O-Ring" to the positive-stop PTFE Seal.

7 Degree Steel Retainer Set of 16 for 3/8" Valve w/ 1.437"-1.500" Spring

1.030" Steel Retainer for use with #26120 valve springs and #600 valve locks.

7 Degree Titanium Retainer for 26926 Spring w/ 8mm Valve Stem

Upgrading to these 7& deg

7 Degree Tool Steel Retainers (8) for 26915/26918 Beehive Valve Springs

7 Degree Tool Steel Retainers (8) for 26915/26918 Beehive Valve Springs.

BELT GUARD, FRONT, FOR 6100 LO

Front Belt Guard for #6100 Magnum Belt Drive System

Bolt for 549102 Thrust Plate

When it comes to street performance and/or competitive racing, the horsepower capability of cylinder heads can be limited if not used with the right parts.

Brake Booster Check Valve - Billet Aluminum - 90 Degree

• Fits Most Brake Boosters w/ .588" Port (Inside Diameter of the Grommet)

Brake Booster Check Valve - Billet Aluminum - 90 Degree

• Fits Most Brake Boosters w/ .588" Port (Inside Diameter of the Grommet)

Brake Booster Check Valve - Billet Aluminum - 90 Degree

• Fits Most Brake Boosters w/ .588" Port (Inside Diameter of the Grommet)

CONICAL SPRING, .945/1.160 OD, 1.600 IH, .585 LIFT, 200 LBS/IN, SUPERFINISH, HR

Cork Gasket Material - 1/8 x 12 x 36 Inch

• Ideal for use to make valve cover gaskets, and intake manifold end seals
• 1/8" x 12" x 36"
• Use w/ Oil

Digital Multi-Retard

• Magnetic pick-up compensation circuit
• Adjustable start retard
• Four stages of retard

DUAL SPRING, 1.546 OD, 1.950 IH, .800 LIFT, 638 LBS/IN, SUPERFINISH, SR

DUAL SPRING, 1.550 OD, 1.900 IN, .740 LIFT, 550 LBS/IN, SUPERFINISH, SR

DUAL SPRING W/ DAMPER, 1.560 OD, 1.950 IH, .760 LIFT, 500 LBS/IN, SR

Dual Taper 7.400" Long, .165" Wall, 7/16" Diameter Pushrod

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 7.550" Long, .165" Wall, 7/16" Diameter Pushrod

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 7.650" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 7.850" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 8.050" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.150" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.