Engine Components

Installation Kit for Low LS Accessory Drive Bracket w/ Long Alignment

• Light weight cast aluminum
• Provides proper belt alignment
• Works with multiple applications

Intake Valves for #60979 Cylinder Heads

The Edelbrock #9779 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

LOWER GEAR, FOR 6502

Lower Gear for #6502 Hi-Tech Belt Drive System

LS Accessory Drive Bracket - Installation Kit for Long Alignment

• Aluminum construction
• Will not rust
• Lighter than steel brackets

LS High-Mount A/C Accessory Drive Bracket - Passenger's Side A/C Bracket

• The most cost effective LS bracket solution on the market!
• Utilizes commonly available and affordable GM A/C compressors
• Accepts GM R4 compressor (Sanden version now available)

Machined Steel Set of 100 - 7 Degree, 11/32", Single Groove Race Locks

Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running, but this isn't the case.

Machined Steel Set of 12 - 7 Degree, 11/32", Single Groove Race Locks

Includes 12 Pairs of Machined Steel Race Locks: 1 Groove, 7& deg

Magnum Polylock Set for 7/16" Rocker Stud

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

Main Platefor 6502 & 6506

Main Plate for #6502 and 6506 Hi-Tech Belt Drive Systems

Performance Street 1.290" OD Beehive Spring; 1.800" Installed Height; 1 Spring

With a .600" maximum lift, these Beehive Valve Springs were designed for hydraulic Roller cams.

PULLEY ADAPTER HUB, FOR 6200ED

Pulley Adapter Hub for #6200EDSK Belt Drive Distributor Mount Kit and Pulley Adapter Hub

Race XD 0.160" Left Offset Pushrod Seat Set for 0.842"/0.875" Diameter Lifters

Race XD Solid Roller Lifters are the strongest, most durable and versatile lifters available from the leader in valve train technology, COMP Cams.

Replacement Timing Chain for 2110 Timing Set

Heavy-duty, heat-treated true double Roller timing chain.

Replacement Timing Chain for 2134 Timing Set

Heavy-duty, heat-treated true double Roller timing chain.

Replacement Timing Chain for 3103 Hi-Tech Timing Set

Ideal for all street performance and race applications.

Replacement Timing Chain for 3112 Hi-Tech Timing Set

Ideal for all street performance and race applications.

Replacement Timing Chain for 3203 Timing Set

Exceed all original equipment timing chain Specifications.

Replacement Timing Chain for 3217 Timing Set

Exceed all original equipment timing chain Specifications.

Replacement Timing Chain for 3223 Timing Set

Exceed all original equipment timing chain Specifications.

Replacement Timing Chain for 3230 Timing Set

Exceed all original equipment timing chain Specifications.

ROCKERS, CS 1.6 3/8" ULTRA PRO

The Ultra Pro Magnumâ„¢ XD Rocker Arms are engineered from durable 8650 Steel that outlasts and outperforms other inferior knock-off and import Rockers.

Set of 100 - 10 Degree, 11/32", Single Groove Locks w/o Lash Cap Recess

Ideal for use in race applications, our wider 10 degree angle locks better distribute increasing spring loads over the retainer more than typicaly 7 degree locks.

Set of 12 - 10 Degree, 11/32", Single Groove Locks w/ Lash Cap Recess

These Steel Super Locks featuring a lash cap recess, 10& deg

Set of 12 - 10 Degree, 11/32", Single Groove Locks w/o Lash Cap Recess

10& deg

Set of 12 - 10 Degree, 3/8", Single Groove Locks w/ Lash Cap Recess

10& deg