Recent vehicles
Vehicles you shop for show up here. Pick one in the Shop By Vehicle bar below.
Clear current vehicleHigh Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.
Free shipping in Canada, ships Oct 1
Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.
Ships Oct 1
Designed for high lift Applications where Pushrod and seat interference are problems at maximum lift, Hi-Tech 210& deg
Free shipping in Canada, ships in about 2 weeks
Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.
Free shipping in Canada, ships Oct 1
3/8 x .500" Metal Body Viton Valve Seal
Ships in about 2 weeks
Free shipping in Canada, ships Oct 1
Ideal for all street performance and race applications.
Ships in about 2 weeks
Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.
Free shipping in Canada, ships Oct 1
Ships in about 2 weeks
Hi-Tech Straight 7.500" Long, .165" Wall, 7/16" Diameter Pushrod - Set of 16
Free shipping in Canada, ships in about 2 weeks
Fits: 11/32" Valve Stems / OE-Size Valve Guides (.400" Outer Diameter).
Ships Oct 1
High Energyâ„¢ Aluminum Polylocks with 7/16" Stud diameter.
Ships in about 2 weeks
< ul>< li> Fits: 11/32" Valve Stems - OE-Size Valve Guides (.400" Outer Diameter)</li>< li> Valves Seals keep unwanted oil from entering the combustion chamber through clearance in the valve guides</li>< li> Use standard o-ring Seal retainer and oil splash shield</li>< li> Requires no machining.
Ships in about 2 weeks
Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.
Free shipping in Canada, ships in about 2 weeks
Free shipping in Canada, ships in about 2 weeks
K-KIT - Complete Kit Includes: Camshaft, Lifters, Valve Springs, Retainers, Valve Locks, Valve Stem Seals, Timing Chain Set, Assembly Lube (in flat tappet applications), Decals and Instructions.
Free shipping in Canada, ships in about 2 weeks
The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.
Free shipping in Canada, ships in about 2 weeks
The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines.
Free shipping in Canada, ships in about 2 weeks
Replacement Timing Chain for 2100 and 2136 Magnum Timing Sets
Ships in about 2 weeks
COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.
Ships in about 2 weeks
Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.
Free shipping in Canada, ships Oct 1
Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.
Free shipping in Canada, ships Oct 1
Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.
Free shipping in Canada, ships in about 2 weeks
3/8 x .530" Metal Body Viton Valve Seal
Ships Oct 1
Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.
Ships in about 2 weeks
