Engine Components

10 Tool Steel Retainer Set of 16 All Valves w/ 1.500"-1.550" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg

10 Tool Steel Retainer Set of 16 for All Valves w/ 1.095" O.D. Springs

These new lightweight 1.095" Spring Diameter Tool Steel Retainers from COMP Cams have a 10& deg

6-BTM Boost Timing Master

• 12-15 Volts, 7 Volt Start
• CARB E.O. Approved
• Supplied with rubber shock mounts

Digital Multi-Retard

• Magnetic pick-up compensation circuit
• Adjustable start retard
• Four stages of retard

DUAL SPRING, 1.546 OD, 1.950 IH, .800 LIFT, 638 LBS/IN, SUPERFINISH

COMP Cams' new 26944 dual valve springs are a product of innovative design and superior craftsmanship.

Engine Valve Spring Kit

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

Engine Valve Spring Kit

Engine Valve Spring Kit

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

Hardened Steel Set of 16 - 7 Degree, 5/16", Single Groove Street Locks

Includes 16 Pairs of hardened Steel Street Locks: 1 Groove, 7& deg

Hi-Tech One-Piece 8.050" Long, .135" Wall, 3/8" Diameter Pushrod

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg

Machined Steel Set of 16 - 7 Degree, 5/16", Single Groove Race Locks

Includes 16 Pairs of Machined Steel Race Locks: 1 Groove, 7& deg

Magnum Polylock Set for 3/8" Rocker Stud

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

Performance Exhaust 063-1256 GM Air Injection Gasket

• Rated up to 1100 F
• Handles exhaust pressures up to 3700 psig
• Designed for an exact port match with JBA headers

Performance Intake Gasket Material

• Conforms well to irregular flange surfaces
• Very good crush resistance at high flange pressures
• Bulk sheet easily cut for making custom gaskets

Retard Module Kit, 1,2,3,4,5 Degrees

MSD Retard Module Kits give you a full selec­tion of retard modules to be used with your Tim­ing Controls.

Set of 16 - 10 Degree, 11/32", Single Groove Locks w/o Lash Cap Recess

These Steel Super Locks without a lash cap recess features a 10& deg

Set of 16 Hardened Lash Caps w/ 5/16" Valve Stem, .230" Head Height

Includes 16 Hardened Lash Caps: 5/16" Stem Size, .230" Head Height, .080" Thickness.

Set of 16 Metal Body Viton Valve Seals for .500" Guide Size, 5/16" Valve Stem

5/16 X .500 Viton Metal Body Seal .546 OD

Stud Girdle Adjusting Nut for 7/16" Stud

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

Stud Girdle Adjusting Nut for 7/16" Stud w/ Snap Ring

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

Stud Girdle Adjusting Nut Set of 12 for 7/16" Stud w/ (4) 4508S Snap Rings

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

Three Stage Retard Control

• Twenty-five degrees start retard
• Three separate retards

Turbocharger Oil Flange Fittings

• These Fittings are Made from 2024 Aluminum w/ Black Anodized Finish & 303 Stainless Steel

UltraPro One Way Check Valve

• Body is Anodized Aluminum

Valve Spring Shim Kit - 1.437" OD, .645" ID .060" Thickness

These .060" thick Valve Spring Shims with 1.437" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.