Engine Components

Hi-Tech 8.200" Long, .105" Wall, 5/16" Diameter Pushrod

With a 17 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech .105 Wall pushrods feature seamless chromemoly tubing that ensures even greater strength and durability.

Hi-Tech 8.380" Long, .080" Wall, 3/8" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 9.100" Long, .080" Wall, 3/8" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 9.500" Long, .080" Wall, 3/8" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech One-Piece 9.750" Long, .135" Wall, 3/8" Diameter Pushrod

Hi-Tech One-Piece 9.750" Long, .135" Wall, 3/8" Diameter Pushrod - Single

Intake Valve for #60929 & #60189 Cylinder Heads

The Edelbrock #9640 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

LS/LT High-Mount Accessory Drive Bracket - Passenger's & Driver's Side Brackets

• The most cost effective LS bracket solution on the market!
• Simple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets
• A/C bracket accepts GM R4 compressor (Sanden version now available)

Machined Steel Set of 16 - 7 Degree, 3/8", Single Groove Race Locks

These single groove Machined Steel Street Locks with 7& deg

Magnum 8.600" Long, .080" Wall, 5/16" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.130" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.295" Long, .080 Wall, 5/16 Diameter Pushrod - Set of 16

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Replacement base to top gasket for Victor Ram #7085, #7086 & 70855

Edelbrock part #7355 replacement base to top gasket for Edelbrock #7085, #7086 & #70855 Victor Ram intake manifolds are made to our high standards of quality and performance.

Set of 16 - 10 Degree 3/8" Single Groove Locks w/o Lash Cap Recess +.050" Height

These Steel Super Locks with +.050 install height feature a 10& deg

Set of 16 Hardened Lash Caps w/ 3/8" Valve Stem, .190" Head Height

Includes 16 Hardened Lash Caps: 3/8" Stem Size, .190" Head Height, .080" Thickness.

Set of 16 Metal Body Viton Valve Seals for .530" Guide Size, 3/8" Valve Stem

3/8 X .530 Viton Metal Body Seal .574 OD

Set of 16 PTFE Valve Seals for .500" Guide Size, 11/32" Valve Stem

< ul>< li> Fits: 11/32" Valve Stems - .500" Guides (.600" Seal Diameter)</li>< li> Valves Seals keep unwanted oil from entering the combustion chamber through clearance in the valve guides</li>< li> Smaller diameter than COMP Umbrella Seals to allow use with double springs</li></ul>

Single Valve Spring with Damper, 1.440 OD, 1.750 IH, .600 Lift, 350 LBS/IN

COMP Cams' new 26942 single valve springs are a product of innovative design and superior craftsmanship.

Single Valve Spring with Damper, 1.486 OD, 1.850 IH, .650 Lift, 410 LBS/IN - 16

COMP Cams' new 26911 single valve springs are a product of innovative design and superior craftsmanship.

Stud Girdle Adjusting Nut for 7/16" Stud

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

Stud Girdle Adjusting Nut Set of 12 for 7/16" Stud w/ (4) 4508S Snap Rings

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

Timing Retard Module Kit, 11°-15° Retard Modules

The kit comes with an 11°, 12°, 13°, 14°, and 15° retard module.

Tru-Time Adjustable Cam Gear

• True laser-etched markings on the leading edge of the gear allow for quick, accurate adjustments
• CNC-machined from 6061-T6 billet aluminum
• Belt surface is hard anodized

Vacuum Cap Assortment

• Allows You To Cap Off Different Sizes Vacuum Ports

Valve Spring Shim Kit - 1.250" OD, .814" ID .015" Thickness

These .015" thick Valve Spring Shims with 1.250" outside diameter and .814" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim Kit - 1.250" OD, .814" ID .030" Thickness

These .030" thick Valve Spring Shims with 1.250" outside diameter and .814" inside diameter are used to equalize the installed height of valve springs.