Engine Components

LS Accessory Drive Bracket - Installation Kit for Middle Alignment

• Aluminum construction
• Will not rust
• Lighter than steel brackets

Valve Spring Shim Kit - 1.437" OD, .645" ID, .015", .030", .060" Thickness

This shim kit contains .015", .030" and .060" thick Valve Spring Shims with 1.437" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

Vacuum Cap Assortment

Use to block off open engine vacuum fittings.

10 AN Plug

• Available for Any Plumbing Situation And Many Custom Applications.

4 AN Plug

• Black Anodized
• Available for Any Plumbing Situation And Many Custom Applications
• 2 per Package

6 AN Plug

• Blue Anodized Aluminum

Dual Valve Spring with Damper, 1.442 OD, 1.800 IH, .600 Lift, 391 LBS/IN, FT/HR - Set

COMP Cams' new 26987 dual valve springs are a product of innovative design and superior craftsmanship.

Elite Race Dual Valve Springs: 1.551" OD, 2.000 IH, .800 Lift, 502 LBS/IN, SR - Set

COMP Cams' 26097 dual valve springs are a product of innovative design and superior craftsmanship.

Hi-Tech 6.950" Long, .080" Wall, 5/16" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 7.500" Long, .080" Wall, 5/16" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 7.800" Long, .080" Wall, 3/8" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Machined Steel Set of 16 - 7 Degree, 11/32", Single Groove Race Locks

Includes 16 Pairs of Machined Steel Race Locks: 1 Groove, 7& deg

Replacement Valve Stem Oil Seal Kit

Edelbrock part #9758 Valve Seal kit is a replacement valve seal kit for all Edelbrock Performer & Performer RPM heads, except Ford FE.

Set of 16 PTFE Valve Seals for .500" Guide Size, 5/16" Valve Stem

< ul>< li> Fits: 5/16" Valve Stems - .500" Guides (.600" Seal Diameter)</li>< li> Valves Seals keep unwanted oil from entering the combustion chamber through clearance in the valve guides</li>< li> Smaller diameter than COMP Umbrella Seals to allow use with double springs</li></ul>

12 AN Plug

• Blue Anodized Aluminum

Check Valve

• Unaffected By Most Lubes

Dual Valve Spring 1.560 OD, 1.900 IH, .740 Lift, 550 LBS/IN, Superfinsh

COMP Cams' new 26943 dual valve springs are a product of innovative design and superior craftsmanship.

Engine Valve Spring

Single Inner Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

Exhaust Valve for #60779 & #60179 Cylinder Heads

The Edelbrock #9367 Exhaust Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Hi-Tech 7.350" Long, .105" Wall, 5/16" Diameter Pushrod Set

With a 17 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech .105 Wall pushrods feature seamless chromemoly tubing that ensures even greater strength and durability.

Hi-Tech 8.325" Long, .080" Wall, 3/8" Diameter Pushrod

Hi-Tech 8.325" Long, .080" Wall, 3/8" Diameter Pushrod - Single

Hi-Tech Polylock for 3/8" Stud Ultra Pro Magnum Rockers

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

Hi-Tech Polylock for 7/16" Stud Ultra Pro Magnum Rockers

7/16 HI-Tech Poly Lock

Hi-Tech Polylock Set for 3/8" Stud Ultra Pro Magnum Rockers

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

Hi-Tech Polylock Set for 7/16" Stud Ultra Pro Magnum Rockers

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.