Engine Components

Set of 8 Metal Viton Valve Seals for .530" Guide Size, 3/8 Valve Stem

3/8 x .530" Metal Body Viton Valve Seal

STEEL RETAINERS, 11/32" 1.437"

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

Straight 7.850" Long, .165" Wall, 7/16" Diameter Pushrod Set

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

Straight 9.800" Long, .165" Wall, 7/16" Diameter Pushrod

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

Valve Spring Shim - 1.000" OD, .688" ID .060" Thickness

10 Degree, 3/8", Single Groove Lock w/o Lash Cap Recess, +.050" Height

Thise Steel Super Lock with +.050 install height features a 10& deg

10 Degree Superlock Retainer Set of 100 for 1.500"-1.550" OD Triple Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Degree Superlock Steel Retainer Set of 4 for 1.500"-1.550" OD Valve Spring

1.500-1.550 Steel Retainer

10 Degree Titanium Retainer Set 12 for 1.5"-1.55" OD Double Springs

Upgrading to these 10& deg

10 Degree Titanium Retainer Set of 12 for 1.250" OD Single Spring

Upgrading to these 10& deg

10 Degree Titanium Retainer Set of 4 for 1.500"-1.550" OD Double Springs

Upgrading to COMP Cams titanium valve spring retainers will often allow you to gain speed and power because titanium retainers are lighter and as stong as most steel ones.

10 Degree Tool Steel Retainer Set of 12 for All Valves w/ 26056 Springs

These new package of 12 1.185" lightweight spring diameter Tool Steel Retainers from COMP Cams have a 10& deg

10 Degree Tool Steel Retainer Set of 16 All Valves w/ 1.500"-1.550" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg

10 Titanium Retainer for 1.500"-1.550" OD Double Springs

Upgrading to these 10& deg

10 Titanium Retainer for 1.500"-1.550" OD Double Springs

Upgrading to these 10& deg

10 Titanium Retainer Set of 16 for 1.250" OD Single Spring

Upgrading to these 10& deg

10 Tool Steel Retainer for All Valves w/ 1.437"-1.500" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg

1 Umbrella Valve Seal for Stock Guide Size, 11/32" Valve Stem

< ul>< li> Fits: 11/32" Valve Stems - OE-Size Valve Guides (.750" Outer Diameter)</li>< li> Valves Seals keep unwanted oil from entering the combustion chamber through clearance in the valve guides</li>< li> Normally used when a larger-than-stock diameter spring is used</li>< li> Requires no machining.

3 AN Plug

• Available for Any Plumbing Situation And Many Custom Applications.

4 AN Plug

• Available for Any Plumbing Situation And Many Custom Applications.

6 AN Plug

• 2 per Package

Big Victor 498cc CNC 12 Degree 2.500" x 1.800"

Edelbrock introduces its new Big Vic CNC 12-degree race head, specifically designed for maximum competition naturally aspirated, nitrous injected, and boosted applications.

Brake Booster Check Valve - Billet Aluminum - 90 Degree

• Fits Most Brake Boosters w/ .588" Port (Inside Diameter of the Grommet)

Cam Hub for 6200 and 6300 Belt Drive

Replaces the cam hub in our 6200/6300 belt drive systems.

Dual Taper 7.800" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.