Engine Components

VALVE SPRINGS, 1.384" 2 SPRING

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

10 Degree, 3/8", Single Groove Lock w/ Lash Cap Recess, -.050" Height

This Steel Super Lock with .050 install height features a lash cap recess, 10& deg

10 Degree, 3/8", Single Groove Lock w/o Lash Cap Recess, +.050" Height

Thise Steel Super Lock with +.050 install height features a 10& deg

10 Degree Superlock Retainer Set of 100 for 1.500"-1.550" OD Triple Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Degree Titanium Retainer Set 12 for 1.5"-1.55" OD Double Springs

Upgrading to these 10& deg

10 Degree Tool Steel Retainer Set of 12 for All Valves w/ 1.095" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg

10 Degree Tool Steel Retainer Set of 12 for All Valves w/ 26056 Springs

These new package of 12 1.185" lightweight spring diameter Tool Steel Retainers from COMP Cams have a 10& deg

10 Titanium Retainer for 1.500"-1.550" OD Double Springs

Upgrading to these 10& deg

10 Titanium Retainer Set of 16 for 1.250" OD Single Spring

Upgrading to these 10& deg

1.125" Tall Polylock Set for High Energy Rockers w/ 3/8" Stud

High Energyâ„¢ Aluminum Polylocks with 3/8" Stud diameter.

12 AN Plug

• Blue Anodized Aluminum

1 Umbrella Valve Seal for Stock Guide Size, 11/32" Valve Stem

< ul>< li> Fits: 11/32" Valve Stems - OE-Size Valve Guides (.750" Outer Diameter)</li>< li> Valves Seals keep unwanted oil from entering the combustion chamber through clearance in the valve guides</li>< li> Normally used when a larger-than-stock diameter spring is used</li>< li> Requires no machining.

2 SPRING ASSEMBLY, 1.536"

Our 954 Dual Valve Springs are perfect for street/strip and racing applications that need high spring pressures to handle aggressive cam profiles.

3 AN Plug

• Available for Any Plumbing Situation And Many Custom Applications.

3 AN Plug

• 2 per Package

4 AN Plug

• Available for Any Plumbing Situation And Many Custom Applications.

6 AN Plug

• 2 per Package

Accessory Drive Replacement Hardware - Godzilla Alternator Bracket

• Direct replacement for Holley Godzilla accessory drive

Brake Booster Check Valve - Billet Aluminum - 90 Degree

• Fits Most Brake Boosters w/ .588" Port (Inside Diameter of the Grommet)

Cam Hub for 6200 and 6300 Belt Drive

Replaces the cam hub in our 6200/6300 belt drive systems.

Carburetor Stud Kit #8006 Zinc Finish 5/16-18 x 1 1/4in (3 Pieces)

Edelbrock #8006 Carburetor Stud Kit for 3-bolt Flange carbs

Dual Taper 7.800" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Endure-X Solid Roller Lifter w/ .904" Diameter, Left Pushrod Seat, .300" Taller

.300" Tall Roller lifter with out oil hole, .210" left offset Pushrod seat, cutaway body with oil band, single lifter

Exhaust Valve for #60599 Cylinder Heads

The Edelbrock #9752 Exhaust Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Exhaust Valve for #60669 & 60689 Cylinder Heads

The Edelbrock #93663 Exhaust Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.