Engine Components

Ultra-Seal Exhaust Gasket Material

• Conforms to and seals minor surface irregularities
• Bulk sheet allows you to create your own custom gaskets
• For OE replacement, high performance street, drag race and oval track use

Hardened Steel Set of 8 - 7 Degree, 11/32", Single Groove Street Locks

Includes 8 Pairs of hardened Steel Street Locks: 1 Groove, 7& deg

High Energy 212/212 Hydraulic Flat Cam for International Harvester 304-392

High Energy 212/212 Hydraulic Flat Cam for International Harvester 304-392.

High Energy 8.350" Long, 5/16" Diameter Pushrod

High Energy pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

Hi-Tech 210 Radius 7.950" Long, .080" Wall, 5/16" Diameter Pushrod Set

< ul>< li> Designed for high lift Applications where Pushrod and seat interference are problems at maximum lift</li>< li> Work well with Rocker arms that feature cup type adjusters and Applications requiring more load bearing surface from the Pushrod</li>< li> Same features as other Hi-Techâ„¢ pushrods with addition of 210& deg

Hi-Tech 8.325" Long, .080" Wall, 5/16" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech Oil Restricting 8.000" Long, .080" Wall, 5/16" Diameter Pushrod

Hi-Tech Oil Restricting 8.000" Long, .080" Wall, 5/16" Diameter Pushrod - Single

Hi-Tech One-Piece 9.250" Long, .135" Wall, 3/8" Diameter Pushrod Set

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg

Hy-Rev Lifters for Buell, Twin Cam and Sportster

Hy-Rev?

ID Spring Locator Set of 16 - 1.540" OD, .520" ID, .060" Thickness

Lifter Kit, Perf Lifters

Our Hy-Rev Anti Pump-Up lifters for 1991 and newer Sportsters are great for increasing valvetrain stability and helping to increase RPM capability.

Magnum 6.200" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 7.200" Long, .080" Wall, 3/8" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 7.450" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Replacement Adjusting Nut for Magnum Rockers w/ 10mm Stud

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

Replacement Adjusting Nut for Magnum Rockers w/ 7/16" Stud

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

ROCKER ARM/PUSHROD KIT, CS 1.6

CS 1.6 Magnum Rocker Kit

ROCKERS, CB 1.6 7/16" ULTRA PR

The Ultra Pro Magnumâ„¢ XD Rocker Arms are engineered from durable 8650 Steel that outlasts and outperforms other inferior knock-off and import Rockers.

ROLLER LIFTER, CSV-6

Set of 12 Metal Viton Valve Seals for .530" Guide Size, 5/16 Valve Stem

5/16 x .530" Metal Body Viton Valve Seal

Set of 8 Metal Body Viton Valve Seals for .500" Guide Size, 3/8" Valve Stem

3/8 X .500 Viton Metal Body Seal .540 OD

Set of 8 Metal Viton Valve Seals for .530" Guide Size, 3/8 Valve Stem

3/8 x .530" Metal Body Viton Valve Seal

STEEL RETAINERS, 11/32" 1.437"

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

STEEL RETAINERS, EB 1.437"

Straight 7.950" Long, .165" Wall, 7/16" Diameter Pushrod Set

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.