Engine Components

1 Metal Body Viton Valve Seal for .530" Guide Size, 3/8" Valve Stem

3/8 X .530 Viton Metal Body Seal .574 OD

1 Metal Viton Valve Seal for .530" Guide Size, 5/16" Valve Stem

5/16 x .530" Metal Body Viton Valve Seal

8 AN Plug

• Available for Any Plumbing Situation And Many Custom Applications.

8 AN Plug

• Available for Any Plumbing Situation And Many Custom Applications

BULK, DUAL SPRINGS W/ DAMPER, 1.442 OD, 1.800 IH, .600 LIFT, 391 LBS/IN, FT/HR

Check Valve

• Unaffected By Most Lubes

Dual Taper 10.000" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Gear Set for International Harvester 304-392 V8 w/ Steel Cam Gear

Constructed from precision hobbed and crown shaved aluminum, Steel and fiber Gears.

Hardened Steel 7 Degree, 11/32", Single Groove Street Lock

Includes 1 Pair of hardened Steel Street Locks: 1 Groove, 7& deg

Hardened Steel Set of 12 - 7 Degree, 3/8", Single Groove Street Locks

Includes 12 Pairs of hardened Steel Street Locks: 1 Groove, 7& deg

High Energy 8.234" Long, 5/16" Diameter Pushrod

High Energy pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

High Quality Rocker Studs 7/16" (Qty 16)

The Edelbrock high-quality rocker studs #8593 7/16" (Set of sixteen) are used in Edelbrock cylinder heads requiring screw-in studs.

Intake Valve for #60579, #61579 & #61599 Cylinder Heads

The Edelbrock #9781 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

LS High-Mount A/C Accessory Drive Bracket - Passenger's Side A/C Bracket

• The most cost effective LS bracket solution on the market!
• Utilizes commonly available and affordable GM A/C compressors
• Accepts GM R4 compressor (Sanden version now available)

O-RING, FOR END PLAY ADJUSTING

• Long lasting durability

Replacement Timing Chain for 2121, 2108 and 2113 Timing Sets

Heavy-duty, heat-treated true double Roller timing chain.

Replacement Timing Chain for 3212 Timing Set

Exceed all original equipment timing chain Specifications.

Service Parts and Hardware Kit for COMP Cams 291 Billet Valve Covers

• The sleek and durable DuPont Black-Wrinkle powder coat finish with polished laser etched logo is sure to provide that…

Set of 100 - 10 Degree 11/32 Single Groove Locks w/ Lash Cap Recess -.050" Height

Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running, but this isn't the case.

Set of 12 - 10 Degree 11/32 Single Groove Locks w/o Lash Cap Recess +.050 Height

These Steel Super Locks with +.050 install height feature a 10& deg

Set of 12 Metal Body Viton Valve Seals for .500" Guide Size, 11/32" Valve Stem

11/32" Viton Metal Body Seal for use with Triple Spring with a Total OD of .546"

Set of 12 Metal Viton Valve Seals for .500" Guide Size, 3/8 Valve Stem

3/8 x .500" Metal Body Viton Valve Seal

Start and Step Timing Control

• Compatible with 4, 6 or 8-cylinder engines
• Accepts points, amplifiers and mag pickup trigger signals

Titanium 10 Degree, 11/32", Single Groove Lock w/ Lash Cap Recess

This Titanium Super Lock with lash cap recess features a 10& deg

Valve Spring Shim - 1.640" OD, .650" ID .060" Thickness

These .060" thick Valve Spring Shims with 1.640" outside diameter and .635" inside diameter are used to equalize the installed height of valve springs.