Engine Components

Installation Kit for GM Gen V LT Accessory Drive

• No engine modification required - completely bolt-on
• Cost Effective and Proven Solution
• Utilizes conventional single sided belt

Intake Valve for #60069 & 60079 Cylinder Heads

The Edelbrock #9754 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valve for #60399 Cylinder Heads

The Edelbrock #9778 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valve for #60599 Cylinder Heads

The Edelbrock #9750 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valve for 60679, 60699, 61669 & 61649 Heads

The Edelbrock #93770 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valve for #60979 Cylinder Heads

The Edelbrock #9774 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for #60519 Cylinder Heads

The Edelbrock #9376 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for 77169, 77179, 77189, 77199 & 77359 Heads

The Edelbrock #9371 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for Fits #60669 & #60689 Cylinder Heads

The Edelbrock #93662 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

LIFTER GUIDE, CS 87-UP

Lifter Guide for Chevrolet V6, Small Block, Non-Vortec 305/350, Vortec, LT1

LIFTER GUIDE SET, CS 87-UP

Lifter Guide Set of 8 for Chevrolet V6, Small Block, Non-Vortec 305/350, Vortec, LT1

Long Main Stud for RHS Billet Main Caps

These parts are included with your purchase of an RHS Race Block but are also available for purchase separately.

Magnum 8.300" Long, .080" Wall, 3/8" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.295" Long, .080 Wall, 5/16 Diameter Pushrod - Single

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

New Style Seal Plate for #6200 and #6300 Hi-Tech Belt Drive Systems

OD Spring Locator Set of 8 - 1.780" OD, .640" ID, .060" Thickness

OD Spring Locator - 1.780" OD, .640" ID, .060" Thickness - Set of 8

Performer Series Retainer (Qty 16)

Edelbrock Valve Spring Retainers are made of superior quality steel and are machined and heat treated for maximum strength.

Performer Series Retainer (Qty 16)

These valve spring retainers are made from 4140L steel and have an 1.375 outer diameter with an 1.070 spring diameter.

Race Endurance 1.551" OD Dual Springs; 1.950" Installed Height; 16 Springs

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

Race Endurance 1.560" OD Dual Spring; 2.050" Installed Height; 1 Spring

Elite Race Double Valve Springs from COMP Cams have a .700" to .800" maximum lift and outside diameter of 1.549".

Race Endurance 1.564" OD Dual Spring; 1.900" Installed Height; 1 Spring

COMP Cams new 26094 dual valve springs are a product of innovative design and superior craftsmanship.

Race Endurance 1.565" OD Dual Spring; 2.000" Installed Height; 1 Spring

COMP Cams Dual Valve Springs for Race Applications are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter the application.

Race Extreme 1.686" OD Triple Spring; 2.200" Installed Height; 1 Spring

Elite Race Triple Valve Springs from COMP Cams have a 1.000" maximum lift and outside diameter of 1.677".

Race Sportsman 1.390" OD Conical Spring; 1.900" Installed Height; 1 Spring

1.060/1.390" OD Conical Spring

Race Sportsman 1.390" OD Conical Springs; 1.900" Installed Height; 16 Springs

Revolutionary Advancement In High Performance Spring Technology. < table border="1">< tbody>< tr>< td>7256-16</td>< td> Outer Diameter and</td>< td> Inner Diameter and</td>< td> Seat Load</td>< td> Open Load</td>< td> Coil Bind</td>< td> Rate and</td></tr>< tr>< td> Top</td>< td>1.060"</td>< td>.660"</td>< td rowspan="2"> 160 @ 1.900"</td>< td rowspan="2"> 495 @ 1.210"</td>< td rowspan="2">1.165"</td>< td rowspan="2">485</td></tr>< tr>< td> Bottom</td>< td>1.390"</td>< td>.990"</td></tr></tbody></table>