Engine Components

STEEL RETAINERS, 1.437"-1.500"

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

Straight 7.750" Long, .165" Wall, 7/16" Diameter Pushrod Set

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

Straight 8.050" Long, .165" Wall, 7/16" Diameter Pushrod Set

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

Straight 8.350" Long, .165" Wall, 7/16" Diameter Pushrod Set

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

Straight 9.900" Long, .165" Wall, 7/16" Diameter Pushrod

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

STUD GIRDLE BAR, CB (1)

COMP Cams' part number 4021-B, STUD GIRDLE BAR, CB (1)

Tensioner Assembly

• Genuine Holley Quality Parts

Tensioner Assembly

• Genuine Holley Quality Parts

Tensioner Upgrade Kit for #1572, #1575, #1591 & #1594 GM E-Force Superchargers

Edelbrock Part #15035 Tensioner Upgrade Kit is engineered to handle the increased belt stress encountered in high horsepower Edelbrock applications.

Tensioner Upgrade Kit for #1598 GM E-Force Superchargers

Edelbrock Part #15029 Tensioner Upgrade Kit is engineered to handle the increased belt stress encountered in high horsepower Edelbrock applications.

Timing Chain for 3127, 3101, 3121, 3108 and 3113 Hi-Tech Timing Sets

Ideal for all street performance and race applications.

Timing Cover Gasket for 6200 Belt Drive

Extreme application belt for high rpm and high compression durability.

Titanium Set of 8 - 10 Degree, 11/32", Single Groove Locks w/ Lash Cap Recess

These Titanium Super Locks with lash cap recess feature a 10& deg

Tru-Time Adjustable Cam Gear Bolt

• Direct replacement
• Stainless Steel
• Accomodates a complete Cam Gear

UltraPro One Way Check Valve

• Body is Anodized Aluminum

VALVE SPRING,1.454" BEEHIVE

Beehive Shape Reduces Spring and Retainer Weight.

Valve Spring Shim - 1.250" OD, .814" ID .015" Thickness

These .015" thick Valve Spring Shims with 1.250" outside diameter and .814" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim - 1.250" OD, .814" ID .030" Thickness

These .030" thick Valve Spring Shims with 1.250" outside diameter and .814" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim - 1.300" OD, .520" ID .015" Thick

Valve Spring Shim - 1.437" OD, .645" ID .015" Thickness

These .015" thick Valve Spring Shims with 1.437" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim - 1.480" OD, .765" ID .015" Thickness

These .015" thick Valve Spring Shims with 1.480" outside diameter and .765" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim - 1.480" OD, .765" ID .060" Thickness

These .060" thick Valve Spring Shims with 1.480" outside diameter and .765" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim - 1.500" OD, .645" ID .030" Thickness

These .030" thick Valve Spring Shims with 1.500" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim - 1.640" OD, .635" ID .015" Thickness

These .015" thick Valve Spring Shims with 1.640" outside diameter and .635" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim - 1.640" OD, .635" ID .030" Thickness

These .030" thick Valve Spring Shims with 1.640" outside diameter and .635" inside diameter are used to equalize the installed height of valve springs.