Engine Components

Hi-Tech Oil Restricting 6.900" Long, .080" Wall, 5/16" Diameter Pushrod Set

COMP Cams Hi-Techâ„¢ Oil Restricting pushrods feature 0.050" oil holes, which are half the size of standard Hi-Techâ„¢ pushrods.

Set of 8 Hardened Lash Caps w/ 11/32" Valve Stem, .210" Head Height

Includes 8 Hardened Lash Caps: 11/32 Stem Size, .210" Head Height, .080" Thickness.

Straight 8.900" Long, .165" Wall, 7/16" Diameter Pushrod

Hi-Tech Straight 8.900" Long, .165" Wall, 7/16" Diameter Pushrod - Single

10 Degree Titanium Retainer Set of 12 for 1.500"-1.550" OD Double Springs

Upgrading to these 10& deg

10 Lightweight Titanium Retainer for 1.500"-1.550" OD Double Springs

Upgrading to these 10& deg

10 Steel Retainer for 26095 Beehive Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Titanium Retainer for 1.500"-1.550" OD Double Springs

Upgrading to these 10& deg

10 Titanium Retainer for 26955, 26956, and 26957 Springs

Upgrading to COMP Cams titanium valve spring retainers will often allow you to gain speed and power because titanium retainers are lighter and stronger than most Steel ones.

10 Titanium Retainer Set of 16 for 26955, 26956, and 26957 Springs

Upgrading to COMP Cams titanium valve spring retainers will often allow you to gain speed and power because titanium retainers are lighter and stronger than most Steel ones.

10 Tool Steel Retainer Set of 16 All Valves w/ 1.437"-1.500" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg

12 AN Port Plug O-Ring

These parts are included with your purchase of an RHS Race Block but are also available for purchase separately.

1 PTFE Valve Seal for .530" Guide Size, 3/8" Valve Stem

< ul>< li> Fits: 3/8" Valve Stems - .530" Guides (.630" Seal Diameter)</li>< li> Valves Seals keep unwanted oil from entering the combustion chamber through clearance in the valve guides</li>< li> Smaller diameter than COMP Umbrella Seals to allow use with double springs</li></ul>

1 PTFE Valve Seal for .530" Guide Size, 5/16" Valve Stem

< ul>< li> Fits: 5/16" Valve Stems - .530" Guides (.630" Outer Diameter)</li>< li> Valves Seals keep unwanted oil from entering the combustion chamber through clearance in the valve guides</li>< li> Smaller diameter than COMP Umbrella Seals to allow use with double springs</li></ul>

1 Umbrella Valve Seal for Stock Guide Size, 3/8" Valve Stem

< ul>< li> Fits: 3/8" Valve Stems - OE-Size Valve Guides (.900" Outer Diameter)</li>< li> Valves Seals keep unwanted oil from entering the combustion chamber through clearance in the valve guides</li>< li> Normally used when a larger-than-stock diameter spring is used</li>< li> Requires no machining.

7 Degree Steel Retainer for 3/8" Valve w/ 1.437"-1.500" Spring

1.030" Steel Retainer for use with #26120 valve springs and #600 valve locks.

7 Degree Steel Retainer Set of 100 for 3/8" Valve w/ 1.437"-1.500" Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

7 Degree Titanium Retainer for 7245 Dual Conical Spring

Upgrading to COMP Cams titanium valve spring retainers will often allow you to gain speed and power because titanium retainers are lighter and as strong as than most Steel ones.

7 Degree Titanium Retainer Set of 100 for 26926 Spring w/ 8mm Stem

Upgrading to these 7& deg

7 Tool Steel Retainer for 8mm Valve, Spring w/ 1.250" O.D

These new Tool Steel Retainers from COMP Cams have a 7& deg

BELT GUARD, REAR, FOR 6100 LOW

Lower Gear Rear Belt Guard for #6100 Magnum Belt Drive System

BOLT, FOR 6100 FRONT BELT GUAR

Front Belt Guard Bolt for #6100 Magnum Belt Drive System

BRACKET; "A", 12" BLANK

• 12 inches long
• Made from high-strength and temperature resistant 6063 aluminum alloy
• Slotted end can be secured with a bolt

Camshaft Bolt for Ford 352-427

Designed to prevent breakage.

DUAL SPRING W/ DAMPER, 1.519 OD, 1.900 IH, .800 LIFT, 376 LBS/IN, FT/HR

Dual Taper 7.400" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.