Engine Components

Endure-X Solid Roller Lifter w/ .842" Diameter, Left Pushrod Seat

Solid Roller lifter with cutaway body with oil band and .180" left offset Pushrod seats, single lifter

Endure-X Solid Roller Lifter w/ .875" Diameter, Right Pushrod Seat, .300" Taller

.300" Tall Roller lifter, .180" right offset Pushrod seat, cutaway body with oil band, single lifter

Endure-X Solid Roller Lifter w/ .904" Diameter, Center Pushrod Seat, .300" Tall

.300" Tall Roller lifter with out oil hole, centered Pushrod seat, cutaway body with oil band, single lifter

Endure-X Solid Roller Lifter w/ .904" Diameter, Left Pushrod Seat, .300" Taller

.300" Tall Roller lifter with out oil hole, .210" left offset Pushrod seat, cutaway body with oil band, single lifter

Engine Valve Spring

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

Engine Valve Spring Kit

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

Engine Valve Spring Kit

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

Exhaust Valve for #60599 Cylinder Heads

The Edelbrock #9752 Exhaust Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Exhaust Valve for #60669 & 60689 Cylinder Heads

The Edelbrock #93663 Exhaust Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Hardware kit for LSA Alternator and Power Steering Accessory Drive

• Genuine Holley Quality Parts

Hardware Kit LT4 Accessory Drive Systems

• Genuine Holley Quality Parts

High Energy 206/206 Hydraulic Flat Cam K-Kit for International Harvester 304-392

K-KIT - Complete Kit Includes: Camshaft, Lifters, Valve Springs, Retainers, Valve Locks, Valve Stem Seals, Timing Chain Set, Assembly Lube (in flat tappet applications), Decals and Instructions.

Hi-Tech 11.100" Long, .080" Wall, 3/8" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 7.000" Long, .080" Wall, 5/16" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the RPM at which the engine will be run.

Hi-Tech 7.200" Long, .105" Wall, 5/16" Diameter Pushrod

With a 17 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech .105 Wall pushrods feature seamless chromemoly tubing that ensures even greater strength and durability.

Hi-Tech 8.000" Long, .105" Wall, 5/16" Diameter Pushrod Set of 12

Designed to be 17% stiffer than 0.080" wall pushrods, COMP Hi-Tech .105" pushrods feature the same diameter oil holes as standard to retain full flow.

Hi-Tech One-Piece 8.600" Long, .135" Wall, 3/8" Diameter Pushrod Set

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg

Hold-Down Tab Kits (Universal 1.5" long in Black Finish (Qty 8)

The Edelbrock #44273 valve cover hold-down kits may be used on all Edelbrock and similar design chrome valve covers, our Elite Series and Elite II valve covers, our Classic Series valve covers and our Victor Series valve covers.

ID Spring Locator - 1.285" OD, .532" ID, .040" Thickness

ID Spring Locator - 1.285" OD, .525" ID, .040" Thickness

ID Spring Locator - 1.285" OD, .805" ID, .135" Thickness

ID Spring Locator - 1.285" OD, .805" ID, .135" Thickness - Single

ID Spring Locator Set of 16 - 1.350" OD, .515" ID, .050" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today.

Intake Valves for #60979 Cylinder Heads

The Edelbrock #9779 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

LOWER GEAR, FOR 6502

Lower Gear for #6502 Hi-Tech Belt Drive System

LS Accessory Drive Bracket - Installation Kit for Long Alignment

• Aluminum construction
• Will not rust
• Lighter than steel brackets

LS High-Mount A/C Accessory Drive Bracket - Passenger's Side A/C Bracket

• The most cost effective LS bracket solution on the market!
• Utilizes commonly available and affordable GM A/C compressors
• Accepts GM R4 compressor (Sanden version now available)