Switches & Controls

Roll/Control, Line/Loc Momentary Button Switch

The Hurst® Roll/Control®, Line/Loc® Switch incorporates a micro switch for an immediate and accurate release.

Momentary Switch - Green Button

• With Momentary Actuator Button
• For Multi-Hit Delay Box Racers
• Bright Green Button

Pushbutton Switch

High shock resistance Moisture and dust proof for marine and off-road racing Epoxy sealed contacts and terminals 6' (18 gauge) coil cord for mounting in almost any location 10 amp. capacity Normally open Roll/Control component.

Remote Switch Kit

• 12V Power Supply
• Y-splitter included
• Two Pole Switch

TRIGGER 4 PLUS Universal Visor Mount

• Designed only for use with the TRIGGER 4 PLUS RF Remote (not included).
• Designed for quick and easy installation.
• Easily removable.

TRIGGER 6 SHOOTER RF Remote Replacement

• Includes remote and base
• base is pre-wired for optional 12V backlight power
• CR2032 batteries required (not included)

TRIGGER 6 SHOOTER Universal Visor Mount

• Designed for quick and easy installation
• Allows remote assembly to be quickly and easily mounted in one of the most easily accessed areas of your interior.
• No drilling or screws and is easily removable without causing any damage to the vehicle.

12 Position Trim Pot

• Positions: 12
• Mounting: 3/8" Hole
• Jam Nut: 1/2" Hex

8-Button CAN Keypad

• Can be mounted vertically or horizontally
• Backlighting color customizable
• Fully programmable via AEMcal software

Electric Toggle Switch Kit

• 12V Power Supply
• Y-splitter included
• Two Pole Switch

Momentary Switch - Large Remote Button

• With XL Actuator Button
• Full Tree Applications
• Pro Tree Applications

Power Symbol On/Off Flush Mount LED Switch

• Requires 16MM Mounting Hole

Pre-Wired Power Symbol On/Off Flush Mount LED Switch

• Requires 16MM Mounting Hole

Pre-Wired Power Symbol On/Off Flush Mount LED Switch

• Requires 16MM Mounting Hole

Pre-Wired Power Symbol On/Off Flush Mount LED Switch

• Requires 16MM Mounting Hole

Toggle Switch On/Off Waterproof

Grounding Switch; Weatherproof Sealed; 8 in.

TRIGGER 4 PLUS Remote Replacement

• Batteries (CR2025) are not included.
• For use with the TRIGGER 4 PLUS Wireless Accessory Control System.
• Replaces used or broken TRIGGER 4 Plus RF Remote

TRIGGER 6 SHOOTER Universal Pedestal Mount

• Designed for quick and easy installation.
• Includes hardware for mounting your RF remote base.
• Adjustable Angle

Universal, Push On/Off Button, Alternate Action Switch

This switch is designed to be used as an auxiliary ignition On/Off but­ton.

2-button External Button Kit for CD Carbon Dashes

• Universally mountable buttons
• Color coordinated for simple identification
• Long flying leads to accommodate for most applications

INVISION JOYSTICK REMOTE MOUNT KIT

• Invision Joystick Remote Mount Kit For All Autometer Invision Dashes
• Allows For Relocation Of Autometer Invision Dash Joystick For A More Ergonomic And User-Friendly Experience
• To Remote Mount The Joystick; Keeping It Discreet And Out-Of-Sight While Still Maintaining Easy Access

Power Symbol On/Off Flush Mount LED Switch

• Requires 16MM Mounting Hole

Power Symbol On/Off Flush Mount LED Switch

• Requires 16MM Mounting Hole

Power Symbol On/Off Flush Mount LED Switch

• Requires 16MM Mounting Hole

Pre-Wired Flush Switch Connector

• Cut down installation process of On/Off and Momentary switches

Pre-Wired Power Symbol On/Off Flush Mount LED Switch

• Requires 16MM Mounting Hole

Pre-Wired Power Symbol On/Off Flush Mount LED Switch

• Requires 16MM Mounting Hole

TRIGGER 4 PLUS RF Remote Flat Mount

• 4.125" x 1.5625" is the hole dimension, the mount can accommodate a 3/32" wall thickness.
• For slightly more custom mounting applications.
• Works with the TRIGGER 4 PLUS RF Remote only.

TRIGGER 4 PLUS Universal Pedestal Mount

• For use with the TRIGGER 4 PLUS Wireless Accessory Control System.
• Designed for quick and easy installation
• Includes hardware for mounting your RF remote base.

TRIGGER Remote Momentary Switch Kit

• Converts a TRIGGER remote to true momentary functionality
• Simple installation with included switch and spring
• Provides precise, responsive control once installed

Carburetor Throttle Stud

Throttle and Cruise Control Stud for Chrysler Applications

Power Symbol On/Off Flush Mount LED Switch

• Requires 16MM Mounting Hole

Sprint Car Crank Trigger to Generator Cross-Over Switch

Also, by setting the generator slightly retarded over the crank trigger, the driver could switch pickups and utilize two timing settings.

Toggle Switch On/Off With Boot 50 Amp

Toggle Switch; 50 amps.

Partriot Electronic Transmitter Remote Part Number

• Available in 2.5" or 3.0" Diameters
• Available in Dual or Single System
• Turn Outs are located on a spin ring to allow 360-degree adjustability