Performance Parts

Pro+ Brake System Rear

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

Pro-Lite 350 Hose - Size 8 - 33 Ft. Length

• Incredible Flexibility

RACE DASH DISPLAY; 8K DUAL RANGE RPM/MPH/FUELP/OILP/OILT/WTMP/VOLT; PRO-COMP

• Built-In Warning And Shift Light Leds
• Programmable Speed Input
• IP67 Sealed

Race Extreme 1.660" OD Triple Spring; 2.050" Installed Height; 1 Spring

Triple Valve Springs from COMP Cams deliver maximum strength, durability and valve train stability.

Replacement Pivot Ball Set for Magnum Rockers w/ 7/16" Stud

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

ROCKER ARM/PUSHROD KIT, CS 1.6

CS 1.6 Magnum Rocker Kit

RPM CHIP KIT; 6.6K RPM; FOR PRO SHIFT; INCL. 6.6K; 6.8K; 7.0K; 7.2K;/7.4K

• RPM Pill Kit

Service Parts Replacement Rotors

• Purpose built castings manufactured from premium materials
• Curved vane design for optimum cooling
• Dynamic balanced for vibration free performance

Service Parts Replacement Rotors

• Purpose built castings manufactured from premium materials
• Curved vane design for optimum cooling
• Dynamic balanced for vibration free performance

Service Parts Replacement Rotors

• Purpose built castings manufactured from premium materials
• Curved vane design for optimum cooling
• Dynamic balanced for vibration free performance

Service Parts Replacement Rotors

• Purpose built castings manufactured from premium materials
• Curved vane design for optimum cooling
• Dynamic balanced for vibration free performance

Service Parts Replacement Rotors

• Purpose built castings manufactured from premium materials
• Curved vane design for optimum cooling
• Dynamic balanced for vibration free performance

Service Parts Replacement Rotors

• Purpose built castings manufactured from premium materials
• Curved vane design for optimum cooling
• Dynamic balanced for vibration free performance

Set of 8 Metal Viton Valve Seals for .530" Guide Size, 3/8 Valve Stem

3/8 x .530" Metal Body Viton Valve Seal

SG Series 3" Speedometer Gauge (200 KPH)

• SG Series
• Stainless Low Step Bezel
• Curved Glass Lens

Silver Gray 2-5/8" Full Sweep Water Temperature Gauge

• Silver Gray 2 5/8" Full sweep Water Temperature gauge with standard stainless steel low step bezel and flat glass lens

Spark Plug Wire / Boot Shrink Tubes 18mm x 1.5" Black 010810

• 3-1 Shrink Ratio
• 25 Tubes To A Package
• Available In Gray/Black/Red And Blue

Speed-Flex Extension Hose

• Pressure Tested To 4000 PSI

Speed-Flex Hyperfirm® Pre-Made Hose

• Pressure Tested To 4000 PSI

Speed-Seal Hose End

• Reliable And Reusable

SS4+ Deep Stage Rear

• Includes 4 Calipers (1.625" Pistons)
• Powder Coated Finish
• 2-Piece Slot, Drilled, Zinc-Plated Rotor

SS4+ Deep Stage Rear

• Includes 4 Calipers (1.375" Pistons)
• Powder Coated Finish
• Billet Aluminum Hats, Drilled for 5/8" Wheel Studs

STEEL RETAINERS, 11/32" 1.437"

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

Straight 9.800" Long, .165" Wall, 7/16" Diameter Pushrod

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

Track4 Brake System Front

• Powder Coated Finish
• Dual Seals, Dust/Weather & Pressure
• 1-Piece Slot, Drilled, Zinc-Plate Rotor