Performance Parts

Hi-Tech 210 Radius 8.550" Long, .080" Wall, 3/8" Diameter Pushrod

Designed for high lift Applications where Pushrod and seat interference are problems at maximum lift, Hi-Tech 210& deg

Hi-Tech 7.500" Long, .080" Wall, 5/16" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 7.800" Long, .080" Wall, 3/8" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 8.325" Long, .080" Wall, 3/8" Diameter Pushrod

Hi-Tech 8.325" Long, .080" Wall, 3/8" Diameter Pushrod - Single

Hi-Tech One-Piece 8.380" Long, .135" Wall, 3/8" Diameter Pushrod Set

Hi-Tech One-Piece 8.380" Long, .135" Wall, 3/8" Diameter Pushrod - Set of 16

Hi-Tech One-Piece 9.250" Long, .135" Wall, 3/8" Diameter Pushrod Set

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg

Hy-Rev Lifters for Buell, Twin Cam and Sportster

Hy-Rev?

ID Spring Locator - 1.285" OD, .805" ID, .040" Thickness

ID Spring Locator - 1.285" OD, .805" ID, .040" Thickness - Single

ID Spring Locator Set of 16 - 1.550" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

Late Model USCAR Fuel Pump Module Mounting Ring - Steel

• Available in 6061 Aluminum, Mild Steel, and 304 Stainless Steel – Choose Same Material as Fuel Tank for Easy Welding

LoadLifter 5000 Ultimate Plus Upgrade Kit

Air Lift Company now offers a kit that allows elite users to upgrade the components of their existing LoadLifter 5000 series air spring kits to those of the new LoadLifter 5000 Ultimate Plus kits.

Magnum 6.750" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.750" Long, .080" Wall, 3/8" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Outer Bearing Race; 8;000-lb. Axles; 5 Pack

• Compatible With 8000 lbs Axles
• Pairs With Bearing No.2475
• Easy DIY Installation; Includes Five Outer Races

Pro+ Brake System Front

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

Pro+ Brake System Rear

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

Pro+ Brake System Rear

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

Pro+ Brake System Rear

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

Pro+ Brake System Rear

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

Pro+ Brake System Rear

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

Pro-Lite 350 Hose - Size 12 - Sold By The Foot up to 50'

• Sold per foot

Pro-Lite 350 Hose - Size 20 - 10 Ft. Length

• Constructed In USA

Race Endurance 1.565" OD Dual Spring; 2.000" Installed Height; 1 Spring

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

ROCKERS, CB 1.6 7/16" ULTRA PR

The Ultra Pro Magnumâ„¢ XD Rocker Arms are engineered from durable 8650 Steel that outlasts and outperforms other inferior knock-off and import Rockers.

S4 Brake System Front

• Powder Coated Finish
• Dual Seals, Dust/Weather & Pressure
• 2-Piece Slot, Drilled, Zinc-Plate Rotor