Performance Parts

Vent Air Filter/ Breather

• 5/16 inch clamp-on flange
• Clamps onto metal or plastic tubing
• Washable and reusable filter media

Water/Methanol Injection Inline Filter

• Filters up to 40 microns.
• Protects the system from foreign particles.
• Comes with 1/4" push lock fittings.

X-Stream Top Assembly

• Air filter top adds filter area
• Improves air flow
• Washable and reusable

X-Stream Top Assembly

• Air filter top adds filter area
• Improves air flow
• Washable and reusable

10 Degree Superlock Steel Retainer Set of 100 for 1.437"-1.500" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

1 Metal Body Viton Valve Seal for .530" Guide Size, 11/32" Valve Stem

11/32" Viton Metal Body Seal for use with Triple Spring with a Total OD of .575"

2.5 Gallon Aluminum Air Tank; (4) 1/4 in. face ports; 6 in. D X 20 in. L, light weight, 200PSI maximum operating pressure

• [4] 1/4 In Face Ports
• Dimensions Of 6 In D X 20 In L
• Raw Aluminum

2.5 Gal. Polished Tank w/ Viair 444c black compressor, 1/4" & 3/8" fittings & tank mounting hardware

• 2.5 Gallon Polished Aluminum Tank
• Viair 444c Black Compressor
• 1/4 Inch And 3/8 Inch Tank Fittings And Tank Mounting Hardware

5 Gal. Polished Tank w/ Viair 444c black compressor, 1/4" & 3/8" fittings and tank mounting hardware

• 5 Gallon Polished Aluminum Tank
• Viair 444c Black Compressor
• 1/4 In And 3/8 In Tank Fittings And Tank Mounting Hardware

7 Steel Retainer for 11/32" Valves w/ 1.500"-1.550" Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

7 Tool Steel Retainer for 8mm Valve w/ 26925 Springs

These new Tool Steel Retainers from COMP Cams have a 7& deg

7 Tool Steel Retainer Set of 12, 11/32" Valve w/ 26926 Springs in Non-LS Engine

These new Tool Steel Retainers from COMP Cams have a 7& deg

All American Nickel 2-5/8" Exhaust Gas Tempature Gauge

• Completely electric
• Push button calibration
• Easy to read 2 5/8" size

All American Trad. 2-5/8" Full Sweep Water Temp Gauge

• Installation hardware included
• Easy to read 2 5/8" size
• Analog

All American Tradition 2-1/8" Fuel Level Gauge

• Pushbutton calibration
• Small 2 ⅛" hole size
• Installation hardware included

All American Tradition 2-1/8" Oil Temperature Gauge

• Installation hardware included
• Small 2 1/8" hole size
• Pushbutton calibration

Autocross Gray 2-1/8" External Air Tempature Gauge

• Installation hardware included
• Pushbutton calibration
• Small 2 ⅛" hole size

Autocross Gray 2-5/8" Boost/Vacuum Gauge

• Easy to read 2 5/8" size
• Pushbutton calibration
• Pressure transducer included

Autocross Yellow 2-5/8" Air Fuel Ratio Gauge

• Full sweep provides increased accuracy
• Easy to read 2 5/8" size
• Push-button calibration

Autocross Yellow 2-5/8" Cylinder Head Tempature Gauge

• Push button calibration
• Completely electric
• Easy to read 2 5/8" size

Autocross Yellow 2-5/8" Fuel Level Gauge (0-90 Ohm)

• Easy to read 2 5/8" size
• 0 ohms empty, 90 ohms full
• Flat glass lens

Auto-Flex Hose - Size 16 - 20 Ft. Length

• Textile Braid In Hose Liner

Axle Wheel Stud; 0.689in. Knurl; 5/8in.-18 Thread; 3-7/16in. Shoulder Length; 4

• Type Wheel Bolt
• Diameter 0.689 in. Knurl
• Thread End 0.625 in.-18

Bearing Race; 2;200-3;500-lb. Axles; 9 Pack

• Pairs With Bearing No.L44649
• Easy DIY Installation; Includes Nine Races
• Compatible With Most Competitor Trailer Axle Hubs

Brakes Premium Aluminum 4-Lug Wheel Spacers – 4x100, 4x108, 4x114.3 Bolt Patterns

• Widen Track
• 6061-T6 Aluminum
• Sold in Pairs