Performance Parts

TUBING; NYLON; 1/8in.; 12FT. LENGTH; INCL. 1/8in. NPTF BRASS COMPRESSION FITTING

• 12 ft. Hose Length
• Burst Pressure 1000PSI
• Incl. Compression Ferrules

V8 Red Steelie 5" Speedometer Gauge (140 MPH)

• V8 Red Steelie
• Stainless Low Step Bezel
• Curved Glass Lens

Valve Spring Shim Kit - 1.437" OD, .645" ID, .015", .030", .060" Thickness

This shim kit contains .015", .030" and .060" thick Valve Spring Shims with 1.437" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

Velocity Black 2-1/8" Volt Gauge

• Push-button calibration
• Easy to read 2 1/8" size
• Installation hardware included

Velocity Black 2-5/8" Oil Temperature Gauge

• Temperature sending unit included
• Installation hardware included
• Full sweep provides increased accuracy

Velocity Black 3-3/8" Ultimate Speedometer Gauge

Velocity Black 3 3/8" Ultimate Speedometer (Speedometer/ Tachometer Combination) with Black Low Step Bezel and Flat Glass Lens.;Features a built-in ECM filter signal switch.

Velocity Black 4-5/8" Speedometer Gauge w/ Info Screen

• Velocity Black 4 5/8" Speedometer with information screen, 160 MPH, with a Black Low Step Bezel and a Flat Glass Lens.

Velocity White 2-5/8" Air Fuel Ratio Gauge

• Full sweep provides increased accuracy
• Easy to read 2 5/8" size
• Push-button calibration

Velocity White 2-5/8" Fuel Level Gauge (1975-2010 Ohm)

• 75 ohms empty, 10 ohms full
• Flat glass lens
• Easy to read 2 5/8" size

Velocity White 2-5/8" Outside Air Tempature Gauge

• Installation hardware included
• Easy to read 2 5/8" size
• Pushbutton calibration

XT/Perf Street Sprung Kit

• "Excellence in Performance", backed by the best one-year warranty in the industry!

40 Series Chambered Muffler

• No internal packing to blowout
• Aggressive Sound Exterior Exhaust Tone
• Durable fully welded 16 gauge aluminized steel

Accelerator Pump Nozzle Kit Includes: .024", .033", .043" Nozzles and Gaskets

The Edelbrock #1475 accelerator nozzle is designed for use with Edelbrock Performer Series as well as Thunder Series AVS carbs.

AEM DryFlow Air Filter

• Engineered to deliver enhanced horsepower & acceleration for a more exhilarating driving experience every time you hit…
• Features a performance-focused filter top that maximizes incoming airflow, helping your engine breathe deeper and run…
• Supported by AEM’s trusted warranty, providing long-lasting confidence and reliability for enthusiasts who demand…

AIR-100-300 Universal Tube

• 3 inch diameter air intake tube
• Plenty of bends and straights to build a custom air intake system
• Includes 30, 45, 60 and 90 degree tube bends

Armor Pro Burnt End Tip

• High Quality Components
• Finish Off Your MBRP Inc. Exhaust In Style
• Clampless/No Weld Install

Armor Pro Exhaust Tip

• High Quality/Mirror Polished T304 Stainless Steel
• Finish Off Your MBRP Inc. Exhaust In Style
• Clampless/No Weld Install

Float

• Genuine Holley Quality Parts

Fuel Line - 3/8 Inch Dual Inlet - Chrome

• Has Silver Brazed Connections
• Chrome Plated 3/8" copper Tubing
• Hex Design Fittings

GAUGE; OIL PRESS; 2 1/16in.; 100PSI; MECHANICAL; Z-SERIES

• No Electrical System Required For Gauge Operation
• Incl. 1/4 in. NPT Adapter
• Incl. Mounting Hardware/Instructions

GAUGE; OIL PRESSURE; 2 1/16in.; 100PSI; ELECTRIC; SPORT-COMP

• 12 And 16V Compatible
• Incl. 1/8 in. NPT Pressure Sender
• Incl. 1/4 in. NPT Adapter

Non Stick Fuel Bowl Gaskets

Non Stick Fuel Bowl Gaskets - For most carburetors with a metering block (4150/4160 style, Q, RQ, SS, HR, QfX Series) - Sold in pack of 10

Round Air Filter

• Designed for racing applications
• Dual cotton layers
• One year limited warranty

SPE-24283 Throttle Cable Bracket

• Fully adjustable
• Fits the majority of 2 barrel and 4 barrel carburetors
• Triple chrome plated

SPE-29683 Dual Feed Line

• Fully adjustable from 8 to 10 In.
• Made from #304 grade stainless steel
• Made from high quality material