Performance Parts

Hi-Tech 10.250" Long, .080" Wall, 3/8" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

LOADLIFTER 5000

• Easy To Install With Illustrated Installation Manual
• Class A Chassis Only
• Requires 9 Between Tire And Frame

Machined Steel Set of 100 - 7 Degree, 5mm, Single Groove Race Locks

Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running, but this isn't the case.

MODULE; WIRING EXTENSION; FOR STEPPER MOTOR INCANDESCENT PYROMETER GAUGES

• Wire Extension Harness

Nostalgia VT 3-3/8" Ultimate Speedometer Gauge

Quality, Service and Value are not new to us.

Plug & Pin Kit for PN 30-8300 PDU-8

• Kit specifically designed for 30-8300 PDU-8
• All hardware included to help ease of installation
• Weather resistant connector

Power Steering Hose End-Black Chromate

• Black Chromate Finish

PRO25SE - Battery Charger

CTEK PRO25SE, 25A battery charger and power supply

Protect-A-Wire 8 Cylinder Kit Blue 010632

• Includes DEI Hi-Temp Shrink Tubes
• Available In 2 And 8 Cylinder Kits
• 8mm I.D.

Race Endurance 1.565" OD Dual Springs; 2.000" Installed Height; 16 Springs

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

Race Extreme 1.635" OD Dual Spring; 1.950" Installed Height; 1 Spring

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

SENSOR KIT; FLUID TEMPERATURE;-40-300deg.F; 1/8in. NPTF MALE; OPTIONAL; AIRDRIVE

• Solid State Data Acquisition Quality Sensor
• 8 Ft Harness

Service Parts Replacement Rotors

• Purpose built castings manufactured from premium materials
• Curved vane design for optimum cooling
• Dynamic balanced for vibration free performance

Service Parts Replacement Rotors

• Purpose built castings manufactured from premium materials
• Curved vane design for optimum cooling
• Dynamic balanced for vibration free performance

Service Parts Replacement Rotors

• Purpose built castings manufactured from premium materials
• Curved vane design for optimum cooling
• Dynamic balanced for vibration free performance

Service Parts Replacement Rotors

• Purpose built castings manufactured from premium materials
• Curved vane design for optimum cooling
• Dynamic balanced for vibration free performance

Set of 12 Metal Body Viton Valve Seals for .530" Guide Size, 5/16" Valve Stem

5/16 X .530 Viton Metal Body Seal 575 OD

Shackle Links; 0.224in. Thickness; 3-1/8in. Center-to-Center; 10 Pack

• Includes 10 Shackle Links
• 1-Year Limited Warranty
• Informative Full-Color Retail Packaging

Shackle Links; 1/2in. Thickness; 3-1/8in. Center-to-Center; 10 Pack

• Includes 10 Shackle Links
• 1-Year Limited Warranty
• Informative Full-Color Retail Packaging

Silver Gray 2-5/8" Cylinder Head Tempature Gauge

• Completely electric
• Easy to read 2 5/8" size
• Push button calibration

Straight 8.150" Long, .165" Wall, 7/16" Diameter Pushrod Set

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

Timing Chain 3110KT, 3110KT-5, 3110KT-10, 3125KT, 3121KT, 3110-5, 3110-10, 3120

Ideal for all street performance and race applications.

Tri Wing Tool

• Tri-Wing Drive Tool, Size 6
• Drop Forged and Tempered to Resist Wear
• Sold Individually

V8 Red Steelie 5" Speedometer Gauge (140 MPH)

• V8 Red Steelie
• Stainless Low Step Bezel
• Curved Glass Lens

Valve Spring Shim Kit - 1.437" OD, .645" ID, .015", .030", .060" Thickness

This shim kit contains .015", .030" and .060" thick Valve Spring Shims with 1.437" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.