Performance Parts

Protect-A-Wire Spools Red 8mm Bulk 010621B

• Constructed From High Temp Resistant Glass Fiber Material
• Withstands 500 Degrees F Continuous 1200 Degrees F Radiant Heat
• Protects Electrical Wiring/Speedometer/Cable/Hoses

Push-Lock Fitting, -10AN, 45-Degree

• -10AN push lock port for simple installation
• Offered in straight, 45-degree, 90-degree, 120-degree, and 180-degree angles to allow for easy routing of lines
• Precision machining provides a leak-free connection with -10AN line

Push-Lock Fitting, -10AN, Straight

• -10AN push lock port for simple installation
• Offered in straight, 45-degree, 90-degree, 120-degree, and 180-degree angles to allow for easy routing of lines
• Precision machining provides a leak-free connection with -10AN line

Push-Lock Fitting, -12AN, 90-Degree

• -12AN push lock port for simple installation
• Offered in straight, 45-degree, 90-degree, and 120-degree angles to allow for easy routing of lines
• Precision machining provides a leak-free connection with -12AN line

Push-Lock Fitting, -6AN, 90-Degree

• -6AN push lock port for simple installation
• Offered in straight, 45-degree, 90-degree, and 180-degree angles to allow for easy routing of lines
• Precision machining provides a leak-free connection with -6AN line

Push-Lock Fitting, -8AN, 180-Degree

• -8AN push lock port for simple installation
• Offered in straight, 45-degree, 90-degree, and 180-degree angles to allow for easy routing of lines
• Precision machining provides a leak-free connection with -8AN line

Push-Lock Fitting, -8AN, 90-Degree

• -8AN push lock port for simple installation
• Offered in straight, 45-degree, 90-degree, and 180-degree angles to allow for easy routing of lines
• Precision machining provides a leak-free connection with -8AN line

Pushrod Seat Removal Tool

With our Pushrod Seat Insert Removal Tool for Elite Raceâ„¢ Solid Roller Lifters, removing the Pushrod seat inserts and swapping them out is a simple process that allows the user to easily adjust the Pushrod angle.

QFT & 4150 Style Pump Arm 30cc

30cc Pump Arm for QFT Q, RQ, P, SS, HR and all other 4150 style carburetors.

QFT & 4150 Style Pump Arm 50cc

• Plated to resist corrosion

QFT Aluminum 50cc Pump Hsg. Cover

QFT Aluminum 50cc Pump Hsg.

QFX 4 Hole Flange Gasket for 1450 CFM 2

QFX 4 Hole Flange Gasket for 1450 CFM

QTY 2 K-Type Closed Tip Thermocouple

• Comes with everything needed to attach to our CAN EGT Module
• Includes K-Type Closed Tip Thermocouple, Inconel sheath, 1/8" NPT compression fitting, 10-foot extension harness
• Sold as a pair

QTY 4 K-Type Closed Tip Thermocouple

• Comes with everything needed to attach to our CAN EGT Module
• Sold in a set of 4
• Includes K-Type Closed Tip Thermocouple, Inconel sheath, 1/8" NPT compression fitting, 10-foot extension harness

Quadrajet 4MV Primary Metering Rod - .037" (Qty 2)

The Edelbrock .037 Meter Rod

QuadraJet Carburetor Spacer #8726 4-Hole 3/4in Thick

The Edelbrock Q-Jet Carburetor Spacer #8726 4-hole design enhances low-rpm torque and throttle response and dampen reversion effects on the carb.

Quadrajet Primary Metering Jet - .072" (Qty 2)

The Edelbrock #1972 Primary Metering Jets For The Edelbrock Q-Jet Carburetor and Factory Quadra jets, All Years .068".

Quick Mount Kit for Coolers and Fans

High tensile nylon mounting rods, locking nuts and rubber shock pads are now available in one complete kit.

Quick Release Clamp Assembly, Black, 2.5in

• Unique locking system for a trustworthy connection to your piping
• Withstands up to 400F and 110PSI operating pressure range
• Allows for angular, axial, and radial movement while remaining sealed with Viton O-rings

Quiet-Floâ„¢ In-Line Black Electric Fuel Pump - 160 GPH

Edelbrock part #1792 is a state-of-the-art Electric Fuel Pump offering maximum performance in a compact package.

Race Endurance 1.551" OD Dual Spring; 2.000" Installed Height; 1 Spring

Elite Race Double Valve Springs from COMP Cams have a .750"+ maximum lift and outside diameter of 1.680".

Race Endurance 1.551" OD Dual Springs; 1.950" Installed Height; 16 Springs

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

Race Endurance 1.560" OD Dual Spring; 2.050" Installed Height; 1 Spring

Elite Race Double Valve Springs from COMP Cams have a .700" to .800" maximum lift and outside diameter of 1.549".

Race Endurance 1.565" OD Dual Spring; 2.000" Installed Height; 1 Spring

COMP Cams Dual Valve Springs for Race Applications are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter the application.

Race Extreme 1.635" OD Dual Springs; 1.950" Installed Height; 16 Springs

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.