Performance Parts

GAUGE; VOLTMETER; 2 1/16in.; 18V; DIGITAL STEPPER MOTOR; GS

• Futuristic Red Point Look
• 1 Year Limited Warranty
• 12 And 16 Volt Compatible

GAUGE; WATER PRESS; 2 1/16in.; 60PSI; MECHANICAL; ULTRA-LITE

• No Electrical System Required For Gauge Operation
• Incl. 1/4 in. NPT Adapter
• Incl. Mounting Hardware/Instructions

Hi-Tech 10.250" Long, .080" Wall, 3/8" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 210 Radius 8.600" Long, .080" Wall, 5/16" Diameter Pushrod

Designed for high lift Applications where Pushrod and seat interference are problems at maximum lift, Hi-Tech 210& deg

Hi-Tech One-Piece 9.250" Long, .135" Wall, 3/8" Diameter Pushrod Set of 8

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg

Hi-Tech Polylock Set for 1/2" Stud Ultra Pro Magnum Rockers

Hi-Tech Polylocks/Adjusting Nuts, 1/2" Stud for Ultra Pro Magnum/Ultra Pro Magnum XD Rockers - Set of 16

HM Grade Federal / EPA Compliant Universal Catalytic Converter

• Durable 308 stainless steel MIG welds
• Compact, lightweight construction enables installation in confined areas, welding is required
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life

HVAC FILTER; 18 X 30 X 1, MERV 11

• Merv 11 rating
• Easy to clean and reuse
• Lifetime limited warranty

Inner Support Hose Spring

• Or When Tight Bends Made

Lippert Universal Tandem Axle Repair Kit-Nylon Bushing

• No Lubrication Required
• Maintenance-Free
• Bushing Material Nylon

LOADLIFTER 5000

• Easy To Install With Illustrated Installation Manual
• Class A Chassis Only
• Requires 9 Between Tire And Frame

Low Voltage Sensor

• Triggers a warning light if your electrical system has 11 volts or less
• Sensor uses either the supplied LED bulb or a stock incandescent bulb

LS High-Mount A/C Accessory Drive Bracket - Fits Sanden SD508 or SD7 Comp.

• The most cost effective LS bracket solution on the market!
• Utilizes commonly available and affordable GM A/C compressors
• Accepts GM R4 compressor (Sanden version now available)

Machined Steel Set of 100 - 7 Degree, 5mm, Single Groove Race Locks

Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running, but this isn't the case.

Moal Bomber 2-5/8" Air Fuel Ratio Gauge

• Full sweep provides increased accuracy
• Easy to read 2 5/8" size
• Push-button calibration

Nostalgia VT 2-5/8" Full Sweep Water Temperature Gauge

Quality, Service and Value are not new to us.

Nostalgia VT 3" Speedometer Gauge (140 MPH)

• 3 3/8" Speedometer
• 140 MPH
• Curved Glass Lens

Nylon Trailer Leaf Spring Bushing; 1-3/4in. Length; 9/16in. Inside Diameter; 4 P

• Compatible With Most Leaf Spring Eyes
• Includes Four Bushings
• 1-Year Limited Warranty

OBD-II Splitter Cable

• Plug and Play
• OBDII connection
• Great addition

Onyx Series Turbo Shield/Blanket GEN-3 T22 Shield

• Silicone coated Onyx Black outer shell.
• Silica inner insulation layer.
• Barrier layer of fine stainless mesh.

Oxygen Sensor Plug

• Designed for enthusiasts
• Made in USA
• Backed by K& N warranty

End Link Kit

Pair of Adjustable End Links

• Chromoly Rod Ends and Easy to Adjust Hex Bodies
• Sold as a pair
• Made in the U.S.A.

End Link Kit

Pair of Adjustable End Links

• Chromoly Rod Ends and Easy to Adjust Hex Bodies
• Sold as a pair
• Made in the U.S.A.

Park Brake Cable

• Attaches to OE Front Cable Section
• Direct Fit, No Cutting Required
• Stainless Steel Cable with a Premium Housing for Long Cable Life

Performance Exhaust 6812W Oxygen Sensor Extension Wires

• 8.5Inch length
• Trapezoid Plug
• 10-15 Chevrolet/GM Vehicles