Performance Parts

12in. Brake Hub with Bearing Kit; 7;000-lb. Axles; 8 on 6-1/2in. Bolt Pattern

• Axle Rating 7000 lbs.
• Wheel Size 16 To 17.5 in.
• Limited 1-Year warranty

12in. Brake Hub with Races/Wheel Studs; 7;000-lb. Axles; 8 on 6-1/2in. Pattern

• 7000lbs Axle Rating
• 16 in. Wheel Size
• 1/2 in. Stud Size

12in. Brake Hub with Races/Wheel Studs; 7;000-lb. Axles; 8 on 6-1/2in. Pattern

• 7000lbs Axle Rating
• 9/16 in. Stud Size
• Limited 1-Year warranty

12in. Hybrid Threaded Grease Brake Hub Assembly with Installed Bearing Kit

• 8000lbs Axle Rating
• 12 in. Brake Hub Size
• 9/16 in. Stud Size

1/2" NPT Internal Plug

• Available for Any Plumbing Situation And Many Custom Applications

14 Inch Reversible Electric Fan Kit

All TCI Electric Reversible Fan Kits either push or pull air by simply reversing the blades.

1/4in NPT Weld-on Bung, Aluminum, Pack of 2

• Universal vehicle fitment - Allows for additional components onto various vehicle systems
• Available in 1/8 , 1/4 , and 3/8 sizes for a perfect fit
• Aluminum construction provides the perfect blend of lightness and strength

1/4" NPT Internal Plugs

• Available for Any Plumbing Situation And Many Custom Applications.

150 PSIg Brass Sensor Kit

• Accurate with 3% margin for error.
• Weather resistant connector and pins included
• Analog Data Scaled in Charts

15-1/4" - 16-1/4" Deep Tank (10-180 Ohm)

Quality, Service and Value are not new to us.

15-amp Universal Circuit Breaker

• Recommended For Apps Where Over Current Protection is Required

15" x 8" HydraMat®, Cross

• Works with Alcohol, Ethanol, Methanol, and E-85 fuels
• Works with 2-Cycle oil blends as high as 20:1
• Not for use with diesel fuels

16AN Straight Flare To 1" NPT Adapter Fitting With Black Finish

• 6061-T6 Aluminum
• Precision Machined

16ORB to 1-1/4in Hose Barb Aluminum Fitting, Black

• Allows for precise routing of fluid cooler lines
• Adapts -16ORB thread to 1-1/4-in push-on hose barb
• CNC-machined 6061 aluminum

17-1/4" - 18-1/4" Deep Tank (1975-2010 Ohm)

Quality, Service and Value are not new to us.

180 Degree Socket Type Coil/Tml Kit

• Socket Style
• All boot/terminals fit 8-10.4mm

18-1/4" - 19-1/4" Deep Tank (0-30 Ohm)

Quality, Service and Value are not new to us.

1/8in NPT Weld-on Bung, Aluminum, Pack of 2

• Universal vehicle fitment - Allows for additional components onto various vehicle systems
• Available in 1/8 , 1/4 , and 3/8 sizes for a perfect fit
• Aluminum construction provides the perfect blend of lightness and strength

1/8" NPT Internal Plugs - Black

• 2 per Package

1/8" NPT to 1/8" NPT Male Coupling

• Available for Any Plumbing Situation And Many Custom Applications.

1/8" NPT to 1/8" NPT Male Coupling

• Fitting seals on the threads. Must use PTFE tape or sealing compound during assembly. DO NOT overtorque.

190, 255, and 350 LPH FUEL PUMP TO -6 ORB ADAPTER

• Clamp-on 6160-T6 aluminum adapter attaches directly to fuel pump body with no modification
• Patented design includes o-ring to seal the fuel pump to the adapter
• Four sizes available to fit the 190, 255, 350, and 455 lph pumps as well as the VR series pumps

19-1/4" - 20-1/4" Deep Tank (10-180 Ohm)

Quality, Service and Value are not new to us.

1-Bar MAP Sensor #36021 for Chevy LS3 applications

The new Edelbrock 1-Bar Manifold Absolute Pressure (MAP) Sensor #36021 is designed to fit Chevrolet LS3 applications that use an Edelbrock LS3 XT intake manifold or any other factory-style intake that has a 12mm MAP sensor port hole.

1 PTFE Valve Seal for .500" Guide Size, 5/16" Valve Stem

< ul>< li> Fits: 5/16" Valve Stems - .500" Guides (.600" Seal Diameter)</li>< li> Valves Seals keep unwanted oil from entering the combustion chamber through clearance in the valve guides</li>< li> Smaller diameter than COMP Umbrella Seals to allow use with double springs</li></ul>