Performance Parts

VALVE SPRINGS, 1.254" OUTER W/

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

Valve Spring Shim - 1.000" OD, .688" ID .060" Thickness

Valve Spring Shim - 1.437" OD, .645" ID .015" Thickness

These .015" thick Valve Spring Shims with 1.437" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim - 1.437" OD, .645" ID .030" Thickness

These .030" thick Valve Spring Shims with 1.437" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim - 1.437" OD, .645" ID .060" Thickness

These .060" thick Valve Spring Shims with 1.437" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim - 1.500" OD, .645" ID .030" Thickness

These .030" thick Valve Spring Shims with 1.500" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim - 1.640" OD, .635" ID .015" Thickness

These .015" thick Valve Spring Shims with 1.640" outside diameter and .635" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim Kit - 1.250" OD, .814" ID .015" Thickness

These .015" thick Valve Spring Shims with 1.250" outside diameter and .814" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim Kit - 1.250" OD, .814" ID .030" Thickness

These .030" thick Valve Spring Shims with 1.250" outside diameter and .814" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim Kit - 1.250" OD, .814" ID .060" Thickness

These .060" thick Valve Spring Shims with 1.250" outside diameter and .814" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim Kit - 1.437" OD, .645" ID .015" Thickness

These .015" thick Valve Spring Shims with 1.437" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim Kit - 1.437" OD, .645" ID .030" Thickness

These .030" thick Valve Spring Shims with 1.437" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim Kit - 1.437" OD, .645" ID .060" Thickness

These .060" thick Valve Spring Shims with 1.437" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim Kit - 1.480" OD, .765" ID .015" Thickness

These .015" thick Valve Spring Shims with 1.480" outside diameter and .765" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim Kit - 1.480" OD, .765" ID .060" Thickness

These .060" thick Valve Spring Shims with 1.480" outside diameter and .765" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim Kit - 1.500" OD, .645" ID, .015", .030", .060" Thickness

This shim kit contains .015", .030" and .060" thick Valve Spring Shims with 1.500" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shims 100 - 1.437" OD, .645" ID .060" Thickness

COMP Cams' Valve Spring Shims are manufactured from the highest quality shim stock available.

Valve Spring Shims 100 - 1.480" OD, .765" ID .030" Thick

COMP Cams' Valve Spring Shims are manufactured from the highest quality shim stock available.

Valve Spring Shim Set of 8 - 1.300" OD, .520" ID .015" Thickness

Valve Stem Locks 3/8" Diameter

Edelbrock part #9612 Valve Stem Locks are 7 Degree, hardened Steel with a 11/32" stem, standard height, machined and hardened replacement valve locks.

Vapor Block Fuel Line Sleeve 0.625" (16mm) I.D. x 36" 010669

• Use On Fuel Lines To Prevent Vapor Lock
• Easy To Cut To Size
• 5/8 in. -16 mm I.D. X 36 in

Vapor Block(TM) Fuel Line Sleeve - 0.5" (13mm) I.D. x 12"

• Use On Fuel Lines To Prevent Vapor Lock
• Easy To Cut To Size
• 1/2in. (13mm) x 12in.

Vapor Block(TM) Fuel Line Sleeve - 0.5" (13mm) I.D. x 24"

• Use On Fuel Lines To Prevent Vapor Lock
• Easy To Cut To Size
• 1/2in. (13mm) x 24in.

Vapor Guard™ Hose Clamp

• Available in 5/16" and 3/8" sizes

V-Band Clamp, Stainless-Steel, w/Flanges, 2.5in (63.5mm)

• Includes V-band clamp and male/female flanges
• Provides a rigid and secure connection between 2.5-in (63.5mm) pipes
• Ideal for stainless steel exhaust pipes, intercooler and charge pipes, intakes, and turbochargers