Performance Parts

ID Spring Locator Set of 16 - 1.600" OD, .570" ID, .060" Thickness

Spring seats for #26055 with .570" guide.

Ignition Brass Open Barrel Kit Terminal kit (326pcs). Contains Ring and Spade terminals; Female and Male Bullet Connectors; for 22-12 AWG wire;PVC covers for terminals;

• 326 Piece Kit
• Insulation Material: PVC Clear
• Wire sizes from 12 - 22 AWG

Ignition Connector kit (150pcs). Contains #6 spade terminals, Butt connector, #6&#8 ring terminals,Female and Male disconnectors for 22-14 AWG wire

• 150 Piece Kit
• Material for Ring and Spde Terminals: Tin Plated Copper
• Wire sizes from 14 - 22 AWG

Ignition Dual Wall Heat Shrink Tube Kit 106 pcs. Contains, Red and Black sleeves tube sizes from 1/8" up to 1/2" in 3" Lengths. Made of Polyolefin, Waterproof, Shrink Ratio 3:1, Rated up to 600V, and Temp. rated at -49° to 257°F

• 106 Piece Dual Wall Shrink Tube (waterproof)
• Tube Sizes from 1/8" to 1"
• Material: Polyolefin (Red and Black)

Ignition Insulated Terminal kit (175pcs). Contains Ring and Spade terminals; Butt connectors; Female and Male disconnects for 22-10 AWG wire(Red,Blue,Yellow)

• PVC Insulated Terminals
• Temperature Rated -10° C to 105° C (-14° to 221° F)
• Wires sizes from 10-22 AWG

Ignition Wire Marker - 8mm - 8.8mm

Identify your wires to eliminate firing order errors.

IN-LINE FUEL PULSE DAMPER

• Fittings included for damper/regulator’s and direct mount dampers
• Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
• Assembled and tested in the USA

IN-LINE FUEL PULSE DAMPER

• Fittings included for damper/regulator’s and direct mount dampers
• Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
• Assembled and tested in the USA

IN-LINE FUEL PULSE DAMPER

• Fittings included for damper/regulator’s and direct mount dampers
• Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
• Assembled and tested in the USA

Inner Bearing Cone-10;000 lbs. Axles

• Industry Number 387A
• Pairs With Inner Bearing Race
• 10000 lbs. Weight Capacity

Inner Bearing Cone-12;000 to 16;000 lbs. Axles

• Industry Number 3984
• Pairs With Outer Bearing Cone
• 12000 To 16000 lbs. Weight Capacity

Inner Bearing Cone-3;500 to 4;400-lb. Axles; 8 Pack

• Compatible With 3500 lbs Axles
• Pairs With Bearing Race No.L68111
• Compatible With Most Competitor Trailer Axle Hubs

Inner/Outer Bearing Cone-2;000 to 3;500-lb. Axles

• Industry Number L44649
• Pairs With Bearing Race PN[L44610]
• 1-1/16 in. Shaft Diameter

Inspection Cover - BB Mopar

• Inspection or Dust Cover
• Powder-coated black steel
• Included with LK6000K

Intake Valve for #61459, #61559 & #61555 Cylinder Heads

The Edelbrock #97040 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for #60379 Cylinder Heads

The Edelbrock #9768 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Inverted flare fitting 7/16-24 for 3/16 inch line

• Manufactured to OE specifications

Inverted flare fitting 9/16-18 for 3/16 inch line

• Manufactured to OE specifications

Inverted Flare to AN Adapter Fitting

• Note the "L" Added to the Part Number for Long Threads - Just Before The "ERL"

Inverted Flare to AN Adapter Fitting

• 7/16"-24 Inverted Flare Male to -6 AN Male
• Adjustable Oil Restrictor Fittings for the Oil Feed (Flare Jet -4 AN Style - Similar to Nitrous Flare Jets)

Inverted Flare to AN Adapter Fitting

• Adjustable Oil Restrictor Fittings for the Oil Feed (Flare Jet -4 AN Style - Similar to Nitrous Flare Jets)

IronSport Brake System Rear

• Single Piston Caliper
• Silver Zinc-Plated Finish
• Integral Park Brake in Caliper

IronSport Brake System Rear

• Single Piston Caliper
• Silver Zinc-Plated Finish
• Integral Park Brake in Caliper

Jet Assortment Kit w/Billet Plate 60-69

• Genuine Holley Quality Parts

Jet Assortment Kit w/Billet Plate 70-79

• Genuine Holley Quality Parts